解决方案

提供使用者应用经验与规范知识

产业解决方案选单

LD雷射二极体规范列表

作者:江志宏

说明:

雷射是由英文字 LASER的音译而来。而 LASER这个字是取自 Light Amplification by Stimulated Emission of Radiation 字串的头一个字母拼凑而来,雷射二极体(laser diode,简称:LD)是某些发光效率特别好的二极体加上光学的共振腔形成,体积比传统的固态雷射或气体雷射小很多。

由于半导体雷射比传统型雷射具有很多优点,比如说轻薄短小、耐震、耗电少、反应快、耐冲撞、寿命长、效率高、方向性佳及输出功率高等特性,适合供作长距离、大容量之通信用光源及存取高密度记录媒体(蓝光),目前也有应用于需要高亮度的微投影。

雷射光其主要特色有:

(1)雷射光为单色光,其频率宽度很窄。 (2)雷射光线为平行光线,其指向性很高,经过长距离后,仍能维持细小光束而不散开。 (3)雷射光之集光性佳,能量密度较高

雷射二极体分类:

Responsive image

雷射二极体波长分类与用途:

Responsive image

各项规范列表:

CNS规范列表:
规范 中文说明
CNS 11640 雷射安全使用标准
CNS 15016-1 雷射产品安全-第1部:设备分类、要求和用户指南
CNS 15016-2 雷射产品安全-第2部:光纤通讯系统之安全性
CNS 11715 一般用雷射唱机检验法
CNS 13648 通信用雷射二极体量测法
CNS 13649 通信用雷射二极体之可靠度测试
CNS 13650 通信用雷射二极体之批品质控制测试
CNS 14181 光纤通信用类比视讯雷射传输和接收模组之性能量测法
CNS 14182 光纤通信用类比视讯雷射传输和接收模组之可靠度及批品质控制测试

ISO雷射标准(ISO laser standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |

编号 中文名称 英文名称
IEC 60601-2-22-1995 医用电气设备 第2-22部分:诊断和治疗用 雷射设备安全的特殊要求 Medical electrical equipment - Part 2: Particular requirements for the safety of diagnostic and therapeutic laser equipment
IEC 60747-5-4-2006 半导体器件.分立器件.第5-4部分:光电器件.半导体雷射器 Semiconductor devices - Discrete devices - Part 5-4: Optoelectronic devices - Semiconductor lasers
IEC 60825-1 AMD 1-1997 雷射产品的安全 第1部分:设备分类、要求和使用者指南 修改1 Safety of laser products - Part 1: Equipment classification, requirements and user's guide; Amendment 1
IEC 60825-1 AMD 2 Corrigendum 1-2002 雷射产品的安全.第1部分:设备分类、要求和使用者指南.修改件2 Safety of laser products - Part 1: Equipment classification, requirements and user's guide; Amendment 2
IEC 60825-1 AMD 2-2001 雷射产品的安全 第1部分:设备分类、要求和使用者指南 修改2 Safety of laser products - Part 1: Equipment classification, requirements and user's guide; Amendment 2
IEC 60825-1 Edition 1.2-2001 雷射产品的安全.第1部分:设备分类、要求和使用者指南 Safety of laser products - Part 1: Equipment classification, requirements and user's guide
IEC 60825-1-1993 雷射产品的安全 第1部分:设备分类、要求和使用者指南 Safety of laser products; part 1: equipment classification, requirements and user's guide
IEC 60825-12-2005 雷射产品的安全.第12部分:用于资讯传输的自由空间光通信系统的安全 Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information
IEC 60825-2-2005 雷射产品的安全.第2部分:光纤通信系统的安全(OFCS) Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)
IEC 60825-4-2006 雷射产品的安全.第4部分:雷射防护器 Safety of laser products - Part 4: Laser guards
IEC 60856 AMD 1-1991 预录光学反射视讯光碟系统 “影音光碟” 50Hz/625行 PAL制 修改1 Pre-recorded optical reflective videodisk system; "laser vision" 50 Hz/625 lines; PAL; amendment 1
IEC 60856 AMD 2-1997 预录光学反射视讯光碟系统 “影音光碟” 50Hz/625行 PAL制 修改2 Pre-recorded optical reflective videodisk system "Laser vision" 50 Hz/625 lines - PAL; Amendment 2
IEC 60856-1986 预录光学反射视讯光碟系统 “影音光碟” 50Hz/625行 PAL制 Pre-recorded optical reflective videodisk system. "Laser vision" 50 Hz/625 lines - PAL
IEC 60857 AMD 1-1991 预录光学反射视讯光碟系统 “影音光碟” 60Hz/525行 M/NTSC制 修改1 Pre-recorded optical reflective videodisk system; "laser vision" 60 Hz/525 lines; M/NTSC; amendment 1
IEC 60857 AMD 2-1997 预录光学反射视讯光碟系统 “影音光碟” 60Hz/525行 M/NTSC制 修改2 Pre-recorded optical reflective videodisk system - "Laser vision" 60 Hz/525 lines - M/NTSC; Amendment 2
IEC 60857-1986 预录光学反射视讯光碟系统 “影音光碟” 60Hz/525行 M/NTSC制 Pre-recorded optical reflective videodisk system. "Laser vision" 60 Hz/525 lines - M/NTSC
IEC 61040-1990 激光辐射用功率和能量测量探测器、仪器和设备 Power and energy measuring detectors, instruments and equipment for laser radiation
IEC 61096 AMD 1-1996 数位音讯雷射唱盘重放设备特性的测量方法 修改1 Methods of measuring the characteristics of reproducing equipment for digital audio compact discs; Amendment 1
IEC 61096-1992 数位音讯雷射唱盘重放设备特性的测量方法 Methods of measuring the characteristics of reproducing equipment for digital audio compact discs
IEC 61280-1-4-2003 纤维光学通信子系统试验程式.第1-4部分:一般通信子系统.多模纤维 雷射发射机用二维近场资料的採集和换算 Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems; Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters
IEC 61280-2-10-2005 纤维光学通信子系统试验程式.第2-10部分:数位系统.雷射发射器的时间分辨线性调频脉冲和α指数测量 Fibre optic communication subsystem test procedures - Part 2-10: Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters
IEC 61751-1998 通信用雷射模组 可靠性评定 Laser modules used for telecommunication - Reliability assessment
IEC 62107-2000 高级影音光碟 光碟交换系统 规范 Super Video Compact Disc - Disc-interchange system-specification
IEC 62148-11-2003 光纤有源元件及器件.包装和介面标准.第11部分:14针调製器集成 雷射二极体发射机 Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator-integrated laser diode transmitters
IEC 62148-12-2004 纤维光学有源元件和器件.包装和介面标准.第12部分:带同轴RF连接器的 雷射传输器 Fibre optic active components and devices - Package and interface standards - Part 12: Laser transmitters with a coaxial RF connector
IEC 62149-3-2004 纤维光学有源元件和器件.性能标准.第3部分:2.5Gbit/s调製器-集成 雷射二极体发射机 Fibre optic active components and devices - Performance standards - Part 3: 2,5 Gbit/s modulator-integrated laser diode transmitters
IEC/TR 60825-10-2002 雷射製品的安全性.第10部分:IEC 60825-1的应用导则和注释 Safety of laser products - Part 10: Application guidelines and explanatory notes to IEC 60825-1
IEC/TR 60825-13-2006 雷射产品的安全.第13部分:雷射产品分类测量 Safety of laser products - Part 13: Measurements for classification of laser products
IEC/TR 60825-14-2004 雷射产品安全.第14部分:使用者指南 Safety of laser products - Part 14: A user's guide
IEC/TR 60825-5-2005 雷射产品安全性.第5部分:IEC 60825-1的製造商检查清单 Safety of laser products - Part 5: Manufacturer's checklist for IEC 60825-1
IEC/TR 60825-8-1999 雷射产品的安全 第8部分:医疗 雷射设备安全使用指南 Safety of laser products - Part 8: Guidelines for the safe use of medical laser equipment
IEC/TR 60825-9-1999 雷射产品的安全 第9部分:非相干光辐射最大允许曝光量的彙集 Safety of laser products - Part 9: Compilation of maximum permissible exposure to incoherent optical radiation
IEC/TR3 60825-3-1995 雷射产品的安全 第3部分:雷射显示器和指示器指南 Safety of laser products - Part 3: Guidance for laser displays and shows
ISO 10110-17-2004 光学和光学仪器.光学元件和系统製图准备.第17部分:激光辐射损害阈 Optics and photonics - Preparation of drawings for optical elements and systems - Part 17: Laser irradiation damage threshold
ISO 11145-2006 光学和光子学.雷射和雷射设备.词彙和符号 Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols
ISO 11146-1-2005 雷射和雷射相关设备.雷射光束宽度、发散角和束扩散率的试验方法.第1部分:无象散和简单象散束 Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams
ISO 11146-2-2005 雷射和雷射相关设备.雷射光束宽度、发散角和束扩散率的试验方法.第2部分:一般像散束 Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams
ISO 11151-1-2000 雷射和雷射设备 标准光学元件 第1部分:紫外线、可见和近红外光谱范围用元件 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
ISO 11151-2-2000 雷射和雷射设备 标准光学元件 第2部分:红外光谱范围用元件 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range
ISO 11252-2004 雷射和雷射设备.雷射装置.对档的最低要求 Lasers and laser-related equipment - Laser device - Minimum requirements for documentation
ISO 11254-1-2000 雷射和雷射设备 光学表面雷射导致损伤阈值的测定 第1部分:1-on-1试验 Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1-on-1 test
ISO 11254-2-2001 雷射器和雷射相关设备 雷射导致光学表面损伤阈值的确定 第2部分:S-on-1 试验 Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S-on-1 test
ISO 11551-2003 光学和光学仪器.雷射和雷射设备.光学 雷射元件光吸收性试验方法 Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components
ISO 11553-1-2005 机械安全.雷射加工机械.第1部分:一般安全要求 Safety of machinery - Laser processing machines - Part 1: General safety requirements
ISO 11554-2006 光学和光子学.雷射和雷射设备.雷射光束功率、能量和时间特徵的试验方法 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics
ISO 11670 Technical Corrigendum 1-2004 雷射和雷射相关设备.雷射光束参数的试验方法.束位置稳定性.技术勘误1 Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability; Technical Corrigendum 1
ISO 11670-2003 雷射和雷射设备.雷射光束参数的试验方法.束定位稳定性 Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability
ISO 11810-1-2005 雷射和雷射相关设备.手术布单和/或病人保护覆盖物耐 雷射性的试验方法和分类.第1部分:基本点燃和穿透性 Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Part 1: Primary ignition and penetration
ISO 11990-2003 光学和光学仪器.雷射和雷射设备.气管柄 雷射抗性的测定 Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts
ISO 12005-2003 雷射和雷射设备.雷射光束参数的试验方法.偏振 Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization
ISO 13320-1-1999 细微性分析 雷射衍射法 第1部分:一般原则 Particle size analysis - Laser diffraction methods - Part 1: General principles
ISO 13694 Technical Corrigendum 1-2005 光学和光学仪器.雷射和雷射设备.雷射光束能量密度分佈的试验方法.技术勘误1 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution; Technical Corrigendum 1
ISO 13694-2000 光学和光学仪器 雷射和雷射设备 雷射光束能量密度分佈的试验方法 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power [energy] density distribution
ISO 13695-2004 光学和光子学.雷射及其相关设备.雷射光谱特性的试验方法 Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers
ISO 13697-2006 光学和光子学.雷射和雷射相关的设备.光学 雷射元件的镜面反射率和正透视度的试验方法 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components
ISO 13919-1-1996 焊接 电子束和雷射焊接头 缺陷的品质分级指南 第1部分:钢 Welding - Electron and laser-beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel
ISO 13919-2-2001 焊接 电子束和雷射光束焊接接头 缺陷品质等级指南 第2部分:铝及其可焊合金 Welding - Electron and laser beam welded joints; Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys
ISO 14408-2005 雷射手术用气管掐管.标识及附带资讯要求 Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information
ISO 15367-1-2003 雷射及雷射相关设备.雷射光束波前形状测定用试验方法.第1部分:术语和基础领域 Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects
ISO 15367-2-2005 雷射及雷射相关设备.雷射光束波前形状测定用试验方法.第2部分:Shack-Hartmann感测器 Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 2: Shack-Hartmann sensors
ISO 15609-4-2004 金属材料的焊接程式规范和鉴定.焊接程式规范.第4部分:雷射光束焊接 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding
ISO 15614-11-2002 金属材料焊接程式的规范和鉴定.焊接程式试验.第11部分:电子和雷射光束焊接 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding
ISO 15616-1-2003 高品质焊接和切割用CO2雷射射线机的验收试验.第1部分:通用原理和验收条件 Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions
ISO 15616-2-2003 高品质焊接和切割用CO2雷射射线机的验收试验.第2部分:静态和动态准确度的测定 Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy
ISO 15616-3-2003 高品质焊接和切割用CO2雷射射线机的验收试验.第3部分:气体流量和压力测量仪的校正 Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure
ISO 16063-11-1999 振动与冲击感测器的校准方法 第11部分:雷射干涉法作主要的振动校准 Methods for the calibration of vibration and shock transducers - Part 11: Primary vibration calibration by laser interferometry
ISO 16063-13-2001 振动和冲击感测器的校准方法 第13部分:用 雷射干涉法的基本校准 Methods for the calibration of vibration and shock transducers - Part 13: Primary shock calibration using laser interferometry
ISO 17123-6-2003 光学和光学仪器.大地测量和测绘仪器的现场试验规程.第6部分:旋转雷射器 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 6: Rotating lasers
ISO 17526-2003 光学和光学仪器.雷射器和雷射相关设备.雷射器的使用寿命 Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers
ISO 17658-2002 焊接.氧气火焰切割、雷射光束切割和等离子体切割的缺陷 Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology
ISO 18755-2005 细陶瓷(高级陶瓷、高级工业陶瓷).用 雷射闪光法测定块体陶瓷的热扩散 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thermal diffusivity of monolithic ceramics by laser flash method
ISO 22826-2005 金属材料焊缝的破坏性试验.雷射和电子束焊接窄接头的硬度试验(维氏和努氏硬度试验) Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
ISO 22827-1-2005 Nd:YAG雷射射线焊接机器的加速试验.带光纤传送的机器.第1部分:雷射装配 Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 1: Laser assembly
ISO 22827-2-2005 Nd:YAG雷射射线焊接机器的加速试验.带光纤传送的机器.第2部分:移动装置 Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 2: Moving mechanism
ISO 2971-1998 捲烟和过滤嘴 公称直径的测定 使用雷射光束测量仪的方法 Cigarettes and filter rods - Determination of nominal diameter - Method using a laser beam measuring apparatus
ISO 6161-1981 个人用护目镜 防激光辐射的滤光镜和护目镜 Personal eye-protectors; Filters and eye-protectors against laser radiation
ISO 8130-13-2001 粉末涂料 第13部分:採用雷射衍射的细微性分析 Coating powders - Part 13: Particle size analysis by laser diffraction
ISO/TR 11146-3 Technical Corrigendum 1-2005 雷射和雷射相关设备.雷射光束宽度、发散角度和束扩散率的试验方法.第3部分:本征的和几何的雷射光束分类、扩散和 Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods; Technical Corrigendum 1
ISO/TR 11146-3-2004 雷射和雷射相关设备.雷射光束宽度、发散角度和束扩散率.第3部分:内在和几何雷射光束分类、扩散和试验方法细节 Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods
ISO/TR 11552-1997 雷射和雷射设备 雷射材料处理机械 性能规范和金属材料切削基准 Lasers and laser-related equipment - Laser materials-processing machines - Performance specifications and benchmarks for cutting of metals
ISO/TR 11991-1995 上呼吸道雷射手术中通气管理指南 Guidance on airway management during laser surgery of upper airway
ISO/TR 17671-6-2005 焊接.金属材料焊接建议.第6部分:雷射光束焊接 Welding - Recommendations for welding of metallic materials - Part 6: Laser beam welding
ISO/TR 22588-2005 光学和光子学.雷射和雷射相关设备.雷射光学元件感应吸收效应的测量和评估 Optics and photonics - Lasers and laser-related equipment - Measurement and evaluation of absorption-induced effects in laser optical components
ISO/TS 17477-2003 使用2维移动光学型雷射器的焊接和切割用CO2雷射光束机器的验收试验 Acceptance tests for CO<(Index)2>-laser beam machines for welding and cutting using 2D moving optics type
编号 中文名称 英文名称

美国雷射标准(ANSI laser standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |

编号 中文名称 英文名称
ANSI Z136.1 Errata-1993 雷射的安全使用.勘误表 Safe use of lasers; Errata
ANSI Z136.1-2000 雷射器的安全使用 Safe Use of Lasers
ANSI Z136.2-1997 雷射二极体和LED光源的光纤通信系统的安全使用 Safe Use of Optical Fiber Communication Systems Utilizing Laser Diode and LED Sources
ANSI Z136.3-2005 保健设施中雷射器的安全使用 Safe Use of Lasers in Health Care Facilities
ANSI Z136.4-2005 危害评定用雷射器安全测量的美国国家标准推荐实施规程 American National Standard Recommended Practice for Laser Safety Measurements for Hazard Evaluation
ANSI Z136.5-2000 教育机构中雷射设备的安全使用 Safe Use of Lasers in Educational Institutions
ANSI Z136.6-2005 户外雷射器的安全使用 Safe Use of Lasers Outdoors
ANSI/ASME B89.4.19-2006 基于球形座标测量系统的雷射器性能评价 Performance Evaluation of Laser Based Spherical Coordinate Measurement Systems
ANSI/AWS C7.2-1998 雷射光束焊接、切割和打孔推荐规程 Recommended Practices for Laser Beam Welding, Cutting, and Drilling
ANSI/EIA/TIA 455-127-1991 多模雷射器的光谱特徵 Spectral Characterization of Multimode Lasers
ANSI/EIA/TIA 455-48B-1990 光纤包覆层直径的雷射类仪器测量 Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments
ANSI/NFPA 115-2003 雷射器防火措施 Laser Fire Protection
ANSI/TIA-455-130-2001 雷射二极体的高温寿命试验 Elevated Temperature Life Test for Laser Diodes
ANSI/TIA-455-48B-1990 利用雷射仪器测量光纤包覆层直径 Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments
ANSI/TIA-568-B.1-4-2003 商用建筑电信电缆敷设标准.第1部分:一般要求.补充件4. 第6类850nm雷射优选的50/125微米多模纤维的鉴别 Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber
ANSI/TIA/EIA 455-128-1996 半导体雷射器阈值电流的测定程式 Procedures for Determining Threshold Current of Semiconductor Lasers
ANSI/TIA/EIA 455-130-2001 雷射二极体的抗高温寿命试验 Elevated Temperature Life Test for Laser Diodes
ANSI/TIA/EIA 455-48B-1990 用雷射测量仪测量光纤连皮直径 Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments
ANSI/TIA/EIA 568-B.1-4-2003 商用建筑电信电缆敷设标准.第1部分:一般要求.附录4.类别6、850nm雷射优选50/125微米多模纤维 Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber
ASTM A 1006/A 1006M-2000 雷射光束焊、平头、无镀层、钢制总管的标准规范 Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded
ASTM C 1070-1986 用雷射扩散法测定氧化铝和石英细微性分佈的试验方法 Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
ASTM D 3460-1998 有白色浮水印和无浮水印的票据、油印机、影印机、複照和雷射印表机用按尺寸切割的办公用纸的标准规范 Standard Specification for White Watermarked and Unwatermarked Bond, Mimeo, Spirit Duplicator, Reprographic, and Laser Printer Cut-Sized Office Papers
ASTM D 4464-2000 雷射散射测定催化材料细微性分佈的标准试验方法 Standard Test Method for Particle Size Distribution of Catalytic Material by Laser Light Scattering
ASTM D 5174-2002 用脉冲雷射磷光光度法测定水中微量铀的标准试验方法 Standard Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry
ASTM D 6187-1997 带有氮雷射感应萤光的石油污染位点的锥形透度计技术特性的标准操作规程 Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence
ASTM D 6466-1999 用Sirolan雷射扫描纤维直径分析仪测定羊毛和其他动物纤维直径的标准试验方法 Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
ASTM D 7134-2005 用矩阵辅助雷射解吸/离子化(MALDI)-飞行时间(TOF)质谱(MS)法测定无规立构聚苯乙烯的平均分子量和分子量分佈 Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)
ASTM D 7153-2005 航空燃料冻结点的标准试验方法(自动雷射法) Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
ASTM E 1458-1992 用光掩模原版校准检验雷射绕射粒子定尺寸仪器的试验方法 Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
ASTM F 1364-2003 使用校准设备验证干涉雷射成像无损轮胎检验系统检验能力的标准实施规范 Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System
ASTM F 1457-1994 与雷射印表机相关的术语 Standard Terminology Relating to Laser Printers
ASTM F 1457b-1994 与雷射印表机相关的标准术语 Standard Termninology Relating to Laser Printers
ASTM F 1497a-1999 导管轴耐雷射性能测定的标准试验方法 Standard Test Method for Determining Laser Resistance of the Shaft of Tracheal Tubes
ASTM F 1628-1995 雷射外科学用套箍和未套箍气管导管及有关治疗的标记和标志的标准规范 Standard Specification for Labeling and Marking of Cuffed and Uncuffed Tracheal Tubes and Related Treatments Intended for Use During Laser Surgery
IEEE 647-1995 单轴雷射陀螺规格导则和试验规程 (Format guide and test procedure for single-axis laser gyros)
编号 中文名称 英文名称

英国雷射标准(BS laser standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |

编号 中文名称 英文名称
BS 3900-J13-2001 涂料的试验方法.涂覆粉试验.用 雷射衍射法分析粒径 Methods of test for paints - Testing of coating powders - Particle size analysis by laser diffraction
BS 5381-2-1998 烟草和烟草製品物理特性测定方法.第2部分:用雷射光束测量仪器测定捲烟和滤嘴标准直径 Methods for determination of physical properties of tobacco and tobacco products - Nominal diameter of cigarettes and filter rods using a laser beam measuring apparatus
BS 6955-1-1994 振动和冲击感测器的校准.採用雷射干涉测量法对主振动的校准方法 Calibration of vibration and shock pick-ups - Methods for primary vibration calibration by laser interferometry
BS 7334-6-1992 建筑施工用测量仪器.第6部分:雷射仪器使用精度的测定方法 Measuring instruments for building construction - Methods for determining accuracy in use of laser instruments
BS DD IEC/PAS 61280-2-10-2003 纤维光学通信子系统试验程式.数位系统.雷射发射机的时间分辨线性调频脉冲和α因数测量 Fibre optic communication subsystem test procedures - Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters
BS EN 12254-1999 雷射工作场所用萤幕.安全要求和试验 Screens for laser working places - Safety requirements and testing
BS EN 12584-1999 氧气火焰切割、雷射光束切割和等离子体切割缺陷.术语 Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology
BS EN 15042-1-2006 覆层厚度测量和表面波纹表徵.採用雷射感应表面声波法对各膜层的弹性常数、密度和厚度的测定指南 Thickness measurement of coatings and characterization of surfaces with surface waves - Guide to the determination of elastic constants, density and thickness of films by laser induced surface acoustic waves
BS EN 207-1999 眼睛保护.抗雷射辐射用滤光镜和护目器(雷射护目镜) Personal eye-protection - Filters and eye-protectors against laser radiation (laser eye-protectors)
BS EN 208-1999 眼睛防护.雷射和雷射系统调节工作用护目镜(雷射调节护目镜) Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
BS EN 2266-005-2005 航空航太系列.通用电缆.操作温度为-55 °C 到 200 °C .紫外雷射可印刷.产品标准 Cables, electrical, for general purpose — Operating temperatures between??-55 ℃ and 200 ℃ — Part 005: UV laser printable — Product standard
BS EN 2266-007-2005 航空航太系列.通用电缆.操作温度为-55 °C 到 200 °C .紫外雷射可印刷多芯装套电缆.产品标准 Cables, electrical, for general purpose — Operating temperatures between –55 ℃ and 200 ℃ — Part 007: UV laser printable multicore jacketed cable — Product standard
BS EN 2267-007-2005 航空系列.一般用途的电缆,电器.-55°C和260°C之间的操作温度.DMA族、单个可列印紫外 雷射和多芯附件.产品标 Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 007: DMA family, single ink-jet printable and multicore assembly — Product standard
BS EN 2267-008-2005 航空系列.一般用途的电缆,电器.-55°C和260°C之间的操作温度.DM族、单个可列印紫外 雷射和多芯附件.产品标 Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 008: DM family, single UV laser printable and multicore assembly — Product standard
BS EN 2267-009-2005 航空系列.一般用途的电缆,电器.-55℃和260℃之间的操作温度.DRA族、单个可列印UV雷射和多芯附件.产品标准 Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 009: DRA family, single and multicore assembly — Product standard
BS EN 2267-010-2005 航空系列.一般用途的电缆,电器.-55℃和260℃之间的操作温度.DM族、单个可列印UV雷射.产品标准 Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 010: DR family, single UV laser printable — Product standard
BS EN 2713-007-2005 航空航太系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 和200 °C之间.遮罩式(螺旋式)和有护套的可印 Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Screened (spiral) and jacketed, UV laser printable - Product standard
BS EN 2714-007-2005 航空航太系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 和260 °C之间.遮罩式(螺旋式)和有护套的可印 Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 007: Screened (spiral) and jacketed, UV laser printable — Product standard
BS EN 2714-011-2005 航空航太系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 和260 °C之间.DM族、遮罩式(螺旋式)和有护套 Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 011: DM family, screened (spiral) and jacketed, UV laser printable — Product standard
BS EN 2714-012-2005 航空航太系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 和260 °C之间.DM族、遮罩式(麻花型)和有护套 Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 012: DM family, screened (braided) and jacketed, UV laser printable — Product standard
BS EN 2714-013-2005 航空航太系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 和260 °C之间.DM族、遮罩式(螺旋式)和有护套 Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 013: DR family, screened (spiral) and jacketed, UV laser printable — Product standard
BS EN 31253-1996 雷射和相关设备.雷射装置.机械介面 Lasers and laser-related equipment - Laser device - Mechanical interfaces
BS EN 3475-706-2005 航空航太系列.飞行器用电缆.试验方法.雷射可标记性 Cables, electrical, aircraft use — Test methods — Part 706: Laser markability
BS EN 60601-2-22-1996 医疗电气设备.安全专门要求.雷射诊断和治疗设备规范 Medical electrical equipment - Particular requirements for safety - Specification for diagnostic and therapeutic laser equipment
BS EN 60825-1-1994 雷射产品的辐射安全性.第1部分:设备分类、要求和使用者指南 Safety of laser products - Equipment classification, requirements and user's guide
BS EN 60825-12-2004 雷射产品的安全.用于资讯传输的自由空间光通信系统的安全 Safety of laser products - Safety of free space optical communication systems used for transmission of information
BS EN 60825-2-2004 雷射产品的安全.光纤通信系统的安全 Safety of laser products - Safety of optical fibre communication systems (OFCS)
BS EN 60825-4-1998 雷射产品安全.雷射防护装置 Safety of laser products - Laser guards
BS EN 60856-1993 50HZ/625行预录式光反射视讯光碟录影系统"雷射视讯光碟".PAL制规范 Specification for pre-recorded optical reflective videodisk system "Laser vision" 50 Hz/625 lines - PAL
BS EN 61040-1993 雷射辐射功率和能量探测器、仪錶和设备规范 Specification for power and energy measuring detectors, instruments and equipment for laser radiation
BS EN 61096-1993 数位雷射唱机用放音设备特性测量方法 Methods of measuring the characteristics of reproducing equipment for digital audio compact discs
BS EN 61280-1-4-2003 光纤通信子系统基本试验程式.一般通信子系统的试验程式.多模纤维 雷射发射机用二维近场数据的採集和整理 Fibre optic communication subsystem basic test procedures - Test procedures for general communication subsystems - Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters
BS EN 61751-1998 雷射电信模组.可靠性评定 Laser modules used for telecommunication - Reliability assessment
BS EN 62107-2002 高级雷射视讯光碟.光碟互换系统.规范 Super video compact disc - Disc-interchange system-specification
BS EN 62148-11-2004 纤维光学有源元件及器件.包装和介面标准.14针调製器集成 雷射二极体发射机 Fibre optic active components and devices - Package and interface standards - 14-pin modulator-integrated laser diode transmitters
BS EN 62148-12-2004 纤维光学有源元件和器件.包装和介面标准.带同轴RF连接器的 雷射发射机 Fibre optic active components and devices - Package and interface standards - Laser transmitters with coaxial RF connector
BS EN 62149-3-2004 纤维光学有源元件和器件.性能标准.2.5Gbit/s调製器-集成 雷射二极体发射机 Fibre optic active components and devices - Performance standards - 2,5 Gbit/s modulator-integrated laser diode transmitters
BS EN 821-2-1997 高技术陶瓷.整体陶瓷.热物理特性. 雷射闪烁法(或热脉冲法)对热扩散率的测定 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Determination of thermal diffusivity by the laser flash (or heat pulse) method
BS EN ISO 11146-1-2005 雷射和雷射相关设备.雷射光束宽度、发散角和束扩散率的试验方法.无象散和简单象散束 Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Stigmatic and simple astigmatic beams
BS EN ISO 11146-2-2005 雷射和雷射相关设备.雷射光束宽度、发散角和束扩散率的试验方法.一般象散束 Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - General astigmatic beams
BS EN ISO 11149-1997 光学和光学仪器.雷射和雷射相关装置.非远端通讯 雷射用的光纤连接器 Optics and optical instruments - Lasers and laser related equipment - Fibre optic connectors for non-telecommunication laser applications
BS EN ISO 11151-1-2000 雷射和雷射相关设备.标准光学元件.紫外线、可见光和近红外光谱范围内的元件 Lasers and laser-related equipment - Standard optical components - Components for the UV, visible and near-infrared spectral ranges
BS EN ISO 11151-2-2000 雷射和雷射相关设备.标准光学元件.红外光谱范围内的元件 Lasers and laser-related equipment - Standard optical components - Components for the infrared spectral range
BS EN ISO 11252-2004 雷射和雷射相关设备.雷射装置.文献工作的最低要求 Lasers and laser-related equipment - Laser device - Minimum requirements for documentation
BS EN ISO 11254-1-2000 雷射和雷射相关设备.光表面雷射导致损伤阈的测定.1-on-1试验 Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - 1-on-1 test
BS EN ISO 11254-2-2001 雷射和雷射相关设备.光表面雷射导至损伤阈值的测定.S-on-1试验 Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - S-on-1 test
BS EN ISO 11551-2004 光学和光学仪器.雷射和雷射设备 Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components
BS EN ISO 11553-1-2005 机械安全.雷射加工机械.一般安全要求 Safety of machinery - Laser processing machines - General safety requirements
BS EN ISO 11670-2003 雷射器和雷射相关设备.雷射光束参数的试验方法.束定位稳定性 Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability
BS EN ISO 11810-1-2005 雷射和雷射相关设备.手术布单和/或病人保护覆盖物耐 雷射性的试验方法和分类.基本点燃和穿透性 Lasers and laser-related equipment - Test method and classification for laser resistance of surgical drapes and/or patient protective covers - Primary ignition and penetration
BS EN ISO 11990-2003 光学和光学仪器.雷射器和相关的雷射设备.气管柄抗 雷射性的测定 Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts
BS EN ISO 12005-2003 雷射器和雷射相关设备.雷射光束参数的试验方法.偏振 Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization
BS EN ISO 13694-2001 光学和光学仪器.雷射和雷射设备.雷射光束能量密度分佈的试验方法 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution
BS EN ISO 13695-2004 光学和光子学.雷射和相关设备.雷射的光谱特性的试验方法 Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers
BS EN ISO 13919-1-1997 焊接.电子和雷射光束焊接接头.缺陷的品质级别导则.钢 Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Steel
BS EN ISO 13919-2-2001 焊接.电子和雷射光束焊接接头.缺陷的品质分级指南.铝及其可焊合金 Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Aluminium and its weldable alloys
BS EN ISO 15367-1-2003 雷射和雷射相关设备.测定雷射光束波阵面形状的试验方法.术语及基础领域 Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Terminology and fundamental aspects
BS EN ISO 15609-4-2004 金属材料焊接程式的规范和合格鉴定.焊接程式规范.雷射光束焊接 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Laser beam welding
BS EN ISO 15614-11-2002 金属材料焊接程式的规范和合格鉴定.焊接程式试验.电子和雷射光束焊接 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Electron and laser beam welding
BS EN ISO 15616-1-2003 高品质焊接和切割用CO2雷射光束机的验收试验.通用原则和验收条件 Acceptance tests for CO2- laser beam machines for high quality welding and cutting - General principles, acceptance conditions
BS EN ISO 15616-2-2003 高品质焊接和切割用CO2雷射光束机的验收试验.静态和动态精确度的测定 Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Measurement of static and dynamic accuracy
BS EN ISO 15616-3-2003 高品质焊接和切割用CO2雷射光束机的验收试验.气体流量和压力测量仪的校正 Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Calibration of instruments for measurement of gas flow and pressure
BS EN ISO 17526-2003 光学和光学仪器.雷射器和雷射相关设备.雷射器的使用寿命 Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers
BS EN ISO 22827-1-2006 Nd:YAG雷射光束焊接机器的验收试验.带光纤送的机器.雷射装配 Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Laser assembly
BS EN ISO 22827-2-2006 Nd:YAG雷射光束焊接机器的验收试验.带光纤传送的机器.移动机理 Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Moving mechanism
BS IEC 60825-8-2000 雷射产品的安全.医疗雷射设备安全使用指南 Safety of laser products - Guidelines for the safe use of medical laser equipment
BS ISO 10110-13-1998 光学和光学仪器.光学元件和系统图纸的製备.第13部分:雷射辐射损坏阈值 Optics and optical instruments - Preparation of drawings for optical elements and systems - Laser irradiation damage threshold
BS ISO 10110-17-2004 光学和光学仪器.光学元件和系统製图准备.雷射辐射损害阈 Optics and optical instruments - Preparation of drawings for optical elements and systems - Laser irradiation damage threshold
BS ISO 13320-1-2000 细微性分析.雷射衍射方法.一般规则 Particle size analysis - Laser diffraction methods - General principles
BS ISO 14408-1998 雷射外科用气管管子的设计.标记和附加资讯要求 Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information
BS ISO 16063-11-2001 振动和冲击感测器的校准方法.採用雷射干涉量度法的主要振动校准 Methods for the calibration of vibration and shock transducers - Primary vibration calibration by laser interferometry
BS ISO 16063-13-2002 振动和冲击感测器的校准方法.採用雷射干涉测量法的主要冲击校准 Methods for the calibration of vibration and shock transducers - Primary shock calibration using laser interferometry
BS ISO 22826-2006 金属材料焊缝的破坏性试验.雷射和电子束焊测定窄接头硬度的试验(维氏和努氏硬度试验) Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
BS ISO TR 11552-1998 雷射和与雷射相关的设备.雷射材料-加工机械.金属切削的性能规范和基准点 Lasers and laser-related equipment - Laser materials-processing machines - Performance specifications and benchmarks for cutting of metals
BS ISO TR 11991-1997 上导气管雷射外科手术时导气管的管理指南 Guidance on airway management during laser surgery of upper airway
BS QC 720102-1997 光纤系统和子系统用带引线的雷射二极体模数的空白详细规范 Blank detail specification for laser diode modules with pigtail for fibre optic systems and subsystems
编号 中文名称 英文名称

德国雷射标准(DIN laser standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |

编号 中文名称 英文名称
DIN 13972-1-2001 牙科技术.雷射焊接过程的品质保证.第1部分:牙科实验室的雷射焊接 Dentistry - Quality assurance during laser welding - Part 1: Laser welding in dental laboratories
DIN 13972-2-2002 牙科学.雷射焊接品质保证.第2部分:雷射焊接用相同和类似牙科金属材料适用性 Dentistry - Quality assurance during laser welding - Part 2: Suitability of identical and similar metallic dental materials for laser welding
DIN 2311-1-1998 使用附加材料的雷射光束表面处理的规范和认可.第1部分:使用消耗材料的雷射表面处理规范 Specification and approval of laser beam surface treatment using additional materials - Part 1: Laser surface treatment specification using consumables
DIN 30965-2000 雷射技术.雷射光束淬透性试验 Laser engineering - Laser beam hardenability test
DIN 32511-1994 材料处理用电子束工艺及雷射工艺.工艺和设备的术语 Electron beam process and laser beam process for material treatment; terms for processes and equipment
DIN 51866-1-2000 温度测量.第1部分:雷射光谱学测量法的测量图 Temperature measurement - Part 1: Survey of laser spectroscopic methods
DIN 51936-1994 炭素材料的试验.高温下用雷射脉冲法测定热扩散率.固体材料 Testing of carbon materials; determination of thermal diffusity at high temperatures by the laser pulse method; solid materials
DIN 56912-1999 光显示雷射器和雷射显示系统.安全性要求 Safety requirements for Lightshow lasers and laser lightshow systems
DIN 65571-4-1992 航空航太.增强纤维.複丝纱的长丝直径的测定.雷射干涉测量法 Aerospace; reinforcement fibres; determination of filament diameter of filament yarns; laser interferometry
DIN EN 1011-6-2006 焊接.金属材料焊接的推荐标准.第6部分:雷射射线焊接.德文版本EN 1011-6-2005 Welding - Recommendation for welding of metallic materials - Part 6: Laser beam welding; German version EN 1011-6:2005
DIN EN 12254-2002 雷射工作场所的遮罩.安全要求和检验 (包括修改件 A1:2002); 德文版本 EN 12254:1998 + A1:2002 Screens for laser working places - Safety requirements and testing (includes Amendment A1:2002); German version EN 12254:1998 + A1:2002
DIN EN 12584-1999 氧基燃料火焰切割、雷射光束切割和等离子切割的缺陷.术语; 三国语言版本 EN 12584:1999 Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology; Trilingual version EN 12584:1999
DIN EN 207-2002 个人眼睛防护.防激光辐射的滤光器和眼镜保护装置(雷射防护镜) (包括修改件 A1:2002); 德文版本 EN 207:1998 Personal eye-protection - Filters and eye-protection against laser radiation (laser eye-protectors) (includes amendment A1:2002); German version EN 207:1998 + A1:2002
DIN EN 208-2002 个人眼睛防护.雷射器和雷射系统校准工作用眼镜防护镜(雷射校准眼睛防护镜) (包括修改件 A1:2002); 德文版本 Personal eye-protection - Eye-protectors for adjustment work on lasers and lasersystems (laser adjustment eye-protectors) (includes amendment A1:2002); German version EN 208:1998 + A1:2002
DIN EN 2266-005-2006 航空系列.一般用途的电缆,电器.55C和200C之间的操作温度.第005部分:可列印UV雷射.产品标准 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 005: UV-laser printable - Product standard; German and English version EN 2266-005:2005
DIN EN 2266-007-2006 航空系列.一般用途的电缆,电器.55C和200C之间的操作温度.第007部分:UV雷射列印多芯电缆.产品标准 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 007: UV laser printable multicore jacketed cable - Product standard; German and English version EN 2266-007:2005
DIN EN 2267-008-2006 航空系列.一般用途的电缆,电器.55C和260C之间的操作温度.第008部分:DM族.单个可列印UV雷射和多芯附件.产品 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 008: DM family, single UV laser printable and muticore assembly - Product standard; German and English version EN 2267-008:2005
DIN EN 60601-2-22-1996 医疗电器设备.第2部分:诊断和治疗用雷射设备安全性特殊要求 Medical electrical equipment - Part 2: Particular requirements for the safety of diagnostic and therapeutic laser equipment (IEC 60601-2-22:1995); German version EN 60601-2-22:1996
DIN EN 60825 Bb.9-2005 雷射产品安全性.第9部分:非相干光辐射最大允许曝光量的彙集.(IEC/TR 60825-9-1999) Safety of laser products - Part 9: Compilation of maximum permissible exposure to incoherent optical radiation (IEC/TR 60825-9:1999)
DIN EN 60825-1-2003 雷射产品的安全.第1部分:设备分类、要求和用户指南 Safety of laser products - Part 1: Equipment classification, requirements and user's guide (IEC 60825-1:1993 + A1:1997 + A2:2001); German version EN 60825-1:1994 + A1:2002 + A2:2001
DIN EN 60825-12-2004 雷射产品的安全.第12部分:用于资讯传输的自由空间光学通信系统的安全 Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information (IEC 60825-12:2004); German version EN 60825-12:2004
DIN EN 60825-2 Berichtigung 1-2006 雷射产品的安全.第2部分:光纤通信系统的安全(OFCS).DIN EN 60825-2 (VDE 0837-2)-2005的勘误 Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) (IEC 60825-2:2004); German version EN 60825-2:2004, Corrigenda to DIN EN 60825-2 (VDE 0837-2):2005-06
DIN EN 60825-2-2005 雷射产品的安全.第2部分:光纤通信系统(OFCS)的安全 Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) (IEC 60825-2:2004); German version EN 60825-2:2004
DIN EN 60825-4-2004 雷射产品的安全.第4部分:雷射防护器 Safety of laser products - Part 4: Laser guards (IEC 60825-4:1997 + A1:2002 + A2:2003); German version EN 60825-4:1997 + A1:2002 + A2:2003
DIN EN 60856-1994 "影音光碟”50Hz/625行预录光学反射视盘系统.PAL制 Pre-recorded optical reflective videodisk system "Laser vision" 50 Hz/625 lines; PAL (IEC 60856:1986 + A1:1993); German version EN 60856:1993 + A1:1993
DIN EN 60856/A2-1998 50Hz/625行的预录製的光学反射"雷射可视"视盘系统.PAL制.修正A2 Pre-recorded optical reflective videodisk system "Laser vision" 50 Hz/625 lines; PAL (IEC 60856:1986/A2:1997); Amendment A2; German version EN 60856:1993/A2:1997
DIN EN 61040-1993 激光辐射功率和能量测量用探测器、测量仪和设备 Power and energy measuring detectors, instruments and equipment for laser radiation (IEC 61040:1990); German version EN 61040:1992
DIN EN 61096-1993 数位音频雷射唱盘放音设备特性测量方法 Methods of measuring the characteristics of reproducing equipment for digital audio compact discs (IEC 61096:1992); German version EN 61096:1993
DIN EN 61104-1993 影音光碟系统.12cm影音光碟-CD-V Compact disc video system; 12 cm CD-V (IEC 61104:1992); German version EN 61104:1992
DIN EN 61280-1-4-2003 光纤通信子系统试验程式.第1-4部分:一般通信子系统.多模纤维雷射发射机用二维近场资料的採集和整理 Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems; Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters (IEC 61280-1-4:2003); German version EN 61280-1-4:2003
DIN EN 61280-2-10-2006 纤维光学通信子系统试验程式.第2-10部分:数位系统.雷射发射机的时间分辨线性调频脉冲和α因数测量(IEC 6128 Fibre optic communication subsystem test procedures - Part 2-10: Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters (IEC 61280-2-10:2005); German version EN 61280-2-10:2005
DIN EN 61751-1998 电信用的雷射模量.可靠性评定 Laser modules used for telecommunication - Reliability assessment (IEC 61751:1998); German version EN 61751:1998
DIN EN 62107-2001 高级影音光碟.光碟交换系统.规范 Super video compact disc - Disc-interchange system-specification (IEC 62107:2000); German version EN 62107:2001
DIN EN 62148-11-2004 纤维光学有源元件及器件.包装和介面标准.第14部分:14针集成调製器雷射二极体发射器 Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator-integrated laser diode transmitters (IEC 62148-11:2003); German version EN 62148-11:2003
DIN EN 62148-12-2004 光纤有源元件及器件.包装和介面标准.第12部分:带同轴RF连接器的雷射发射机 Fibre optic active components and devices - Package and interface standards - Part 12: Laser transmitters with coaxial RF connector (IEC 62148-12:2004); German version EN 62148-12:2004
DIN EN 62149-3-2004 纤维光学有源元件和器件.性能标准.第3部分:2.5Gbit/s调製器-集成雷射二极体发射机 Fibre optic active components and devices - Performance standards - Part 3: 2,5 Gbit/s modulator-integrated laser diode transmitters (IEC 62149-3:2004); German version EN 62149-3:2004
DIN EN 821-2-1997 高级陶瓷.整体陶磁.热物理性能.第2部分:用雷射闪光法(或热能脉冲)测定导热能力 Advanced technical ceramics - Monolithic ceramics, thermo-physical properties - Part 2: Determination of thermal diffusity by the laser flash (or heat pulse) method; German version EN 821-2:1997
DIN EN ISO 11145-2006 光学和光子学.雷射和相关设备.术语和符号(ISO 11145:2006) Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2006); German version EN ISO 11145:2006
DIN EN ISO 11146-1-2005 雷射和雷射相关设备.雷射光束宽度、发散角和束扩散率的试验方法.第1部分:无象散和简单象散束 Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams (ISO 11146-1:2005); German version EN ISO 11146-1:2005
DIN EN ISO 11146-2-2005 雷射和雷射相关设备.雷射光束宽度、发散角和束扩散率的试验方法.第2部分:一般象散束 Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams (ISO 11146-2:2005); German version EN ISO 11146-2:2005
DIN EN ISO 11151-1-2000 雷射和雷射设备.标准光学元件.第1部分:紫外线、可见光和近红外线光谱范围用元件 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the ultraviolet, visible and near-infrared spectral range (ISO 11151-1:2000); German version EN ISO 11151-1:2000
DIN EN ISO 11151-2-2000 雷射和雷射设备.标准光学元件.第2部分:红外光谱范围用元件 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2000); German version EN ISO 11151-2:2000
DIN EN ISO 11252-2005 雷射器和雷射相关设备.雷射装置.对档的最低要求 Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2004); German version EN ISO 11252:2004
DIN EN ISO 11254-1-2000 雷射和雷射设备.雷射诱导的光学表面损伤阈值的测定.第1部分:1-on-1试验 Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1-on-1 test (ISO 11254-1:2000); German version EN ISO 11254-1:2000
DIN EN ISO 11254-2-2002 雷射和雷射相关设备.光学表面雷射诱导损伤阈的测定.第2部分:S-on-1 试验 (ISO 11254-2:2001); 德文版本 EN Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S-on-1 test (ISO 11254-2:2001); German version EN ISO 11254-2:2001
DIN EN ISO 11551-2004 光学和光学仪器.雷射和雷射设备.光学雷射元件光吸收性试验方法 Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components (ISO 11551:2003); German version EN ISO 11551:2003
DIN EN ISO 11553-1-2005 机械安全.雷射加工机械.第1部分:一般安全要求 Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005); German version EN ISO 11553-1:2005
DIN EN ISO 11554-2006 光学和光子学.雷射和相关雷射设备.雷射光束功率、能量和时间特徵的试验方法(ISO 11554:2006) Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006); German version EN ISO 11554:2006
DIN EN ISO 11670-2003 雷射和雷射相关设备.雷射光束参数的试验方法.束定位稳定性 Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability (ISO 11670:2003); German version EN ISO 11670:2003
DIN EN ISO 11810-1-2005 雷射和雷射有关设备.手术布单和/或病人保护用覆盖物耐雷射性试验方法和分类.第1部分:基本点燃和穿透性 Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Part 1: Primary ignition and penetration (ISO 11810-1:2005); German version EN ISO 11810-1:2005
DIN EN ISO 11990-2003 光学和光学仪器.雷射和雷射设备.气管导管柄雷射抗性的测定 Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts (ISO 11990:2003); German version EN ISO 11990:2003
DIN EN ISO 12005-2003 雷射和雷射相关设备.雷射光束参数的试验方法.偏振 Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization (ISO 12005:2003); German version EN ISO 12005:2003
DIN EN ISO 13694-2000 光学和光学设备.雷射和雷射相关设备.雷射光束能量密度分佈的试验方法 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2000); German version EN ISO 13694:2000
DIN EN ISO 13695-2004 光学和光子学.雷射及其相关设备.雷射光谱特性的试验方法 Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers (ISO 13695:2004); German version EN ISO 13695:2004
DIN EN ISO 13697-2006 光学和光子学.雷射和雷射相关的设备.光学雷射元件的镜面反射率和正透视度的试验方法(ISO 13697-2006) Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components (ISO 13697:2006); German version EN ISO 13697:2006
DIN EN ISO 13919-1-1996 焊接.电子和雷射光束焊接接头.品质缺陷等级指南.第1部分:钢 Welding - Electrons and laser beam welded joints; guidance on quality levels for imperfections - Part 1: Steel (ISO 13919-1:1996); German version EN ISO 13919-1:1996
DIN EN ISO 13919-2-2001 焊接.电子和雷射光束焊接接头.品质缺陷等级导则.第1部分:铝及可焊铝合金 Welding - Electron and laser beam welded joints; Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2001); German version EN ISO 13919-2:2001
DIN EN ISO 14408-2005 雷射手术用气管掐管.标识及随机档要求 Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information (ISO 14408:2005); German version EN ISO 14408:2005
DIN EN ISO 15367-1-2004 雷射和雷射相关设备.雷射光束波阵面形状的测试方法.第1部分:术语和基础领域 Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects (ISO 15367-1:2003); German version EN ISO 15367-1:2003
DIN EN ISO 15367-2-2005 雷射及雷射相关设备.雷射光束波前形状测定用试验方法.第2部分:Shack-Hartmann感测器 Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 2: Shack-Hartmann sensors (ISO 15367-2:2005); German version EN ISO 15367-2:2005
DIN EN ISO 15609-4-2004 金属材料焊接程式的规范和合格评定.焊接程式规范.第4部分:雷射光束焊接 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO 15609-4:2004); German version EN ISO 15609-4:2004
DIN EN ISO 15614-11-2002 金属材料焊接程式的规范和鉴定.焊接程式试验.第11部分:电子和雷射光束焊接 (ISO 15614-11:2002); 德文版本 EN Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002); German version EN ISO 15614-11:2002
DIN EN ISO 15616-1-2003 高品质焊接和切割用CO2雷射机验收试验.第1部分:通则和验收条件 Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003); German version EN ISO 15616-1:2003
DIN EN ISO 15616-2-2003 高品质焊接和切割用CO2雷射机验收试验.第2部分:静态和动态精度测定 Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003); German version EN ISO 15616-2:2003
DIN EN ISO 15616-3-2003 高品质焊接和切割用CO2雷射机验收试验.第3部分:气体流量和压力测量仪校正 Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003); German version EN ISO 15616-3:2003
DIN EN ISO 17526-2003 光学和光学仪器.雷射器和雷射相关设备.雷射器的使用寿命 Optic and optical instruments - Lasers and laser-related equipment - Lifetime of lasers (ISO 17526:2003); German version EN ISO 17526:2003
DIN EN ISO 22827-1-2006 Nd:YAG雷射射线焊接机器的加速试验.带光纤传送的机器.第1部分:雷射装配(ISO 22827-1-2005).德文版本 EN ISO Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 1: Laser assembly (ISO 22827-1:2005); German version EN ISO 22827-1:2005
DIN EN ISO 22827-2-2006 Nd:YAG雷射射线焊接机器的加速试验.带光纤传送的机器.第2部分:移动装置(ISO 22827-2-2005).德文版本 EN ISO Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 2: Moving mechanism (ISO 22827-2:2005); German version EN ISO 22827-2:2005
DIN EN ISO 9513 Bb.2-2005 金属材料.单轴向试验用伸长计的校准.雷射伸长计系统及其校准 Metallic materials - Calibration of extensometers used in uniaxial testing - Laser extensometer systems and their calibration
DIN ISO 10110-17-2004 光学和光子学.光学元件和系统製图准备.第17部分:雷射辐照损伤阈 Optics and photonics - Preparation of drawings for optical elements and systems - Part 17: Laser irradiation damage threshold (ISO 10110-17:2004)
DIN ISO 2971-2004 香烟和过滤嘴.标称直径的测定.使用雷射光束测量仪器的方法 Cigarettes and filter rods - Determination of nominal diameter - Method using a laser beam measuring apparatus (ISO 2971:1998)
DIN ISO 8130-13-2005 粉末涂料.第13部分:採用雷射衍射的粒度分析 Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2001)
DIN V 32540-1997 雷射光束磨蚀.雷射光束热磨蚀.定义、影响因素、程式 Laser beam removing - Thermal removing with laser beam - Definitions, influence factors, procedure
编号 中文名称 英文名称

欧洲雷射标准(EN laser standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |

编号 中文名称 英文名称
EN 12254-1998+A1-2002 雷射工作场所遮罩 安全要求和试验 Screens for laser working places - Safety requirements and testing
EN 12584-1999 氧气火焰切割、雷射光束切割和等离子体切割的缺陷 术语 Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology
EN 12626-1997 机械安全 雷射加工机械 安全要求 Safety of machinery - Laser processing machines - Safety requirements (ISO 11553:1996 modified)
EN 207-1998+A1-2002 个人眼睛保护装置 抗激光辐射用滤光器和护目器(雷射护目镜) Personal eye-protection - Filters and eye-protectors against laser radiation (laser eye-protectors)
EN 208-1998+A1-2002 个人眼睛保护装置 雷射和雷射系统调节工作用护目镜(雷射调节护目镜) Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
EN 31252-1994 雷射和雷射设备 雷射装置 对档的最低要求 Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:1993)
EN 31253-1994 雷射和雷射设备 雷射装置 机械介面 Lasers and laser-related equipment - Laser device - Mechanical interfaces (ISO 11253:1993)
EN 60601-2-22-1996 医疗电气设备 第2-22部分:诊断和治疗用雷射设备安全的特殊要求 Medical electrical equipment - Part 2-22: Particular requirements for the safety of diagnostic and therapeutic laser equipment (IEC 60601-2-22:1995)
EN 60825-1-1994+A2-2001+A11-1996 雷射产品的辐射安全 第1部分:设备分类、要求和用户指南 Safety of laser products; part 1: equipment classification, requirements and users guide (IEC 60825-1:1993)
EN 60825-1/prA3-1999 雷射产品的辐射安全 第1部分:设备分类、要求和用户指南 修改草案3 Amendment to IEC 60825-1: Cross-reference Annex for associated parts of IEC 60825
EN 60825-1/prAA-1999 雷射产品的辐射安全 第1部分:设备分类、要求和用户指南 修改草案AA Amendment 2 to IEC 60825-1: Safety of laser products - Part 1: Equipment classification, requirements and users guide
EN 60825-2-2000 雷射产品安全 第2部分:光纤通信系统的安全 Safety of laser products - Part 2: Safety of optical fibre communication systems (IEC 60825-2:2000)
EN 60825-4-1997+A1-2002 雷射产品安全 第4部分:雷射防护装置 Safety of laser products - Part 4: Laser guards (IEC 60825-4:1997)
EN 60856-1993+A1-1993+A2-1997 行预录式光反射视盘系统"影音光碟" 50Hz/625行PAL制 Pre-recorded optical reflective videodisk system "Laser vision" 50 Hz/625 lines; PAL (IEC 60856:1986)
EN 60908-1999 雷射唱片数位音响系统规范 Audio recording - Compact disc digital audio system (IEC 60908:1999)
EN 61040-1992 激光辐射功率和能量测量探测器、仪錶和设备 Power and energy measuring detectors, instruments and equipment for laser radiation (IEC 61040:1990)
EN 61096-1993+A1-1996 数位音频雷射唱盘重放设备特性的测量方法 Methods of measuring the characteristics of reproducing equipment for digital audio compact discs (IEC 61096:1992)
EN 61280-1-4-2003 光纤通信子系统试验程式 第1-4部分:一般通信子系统 多模纤维雷射发射机的双维近场资料的收集和整理 Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems; Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters (IEC 61280-1-4:2003) / Note: Endorsement notice
EN 61751-1998 电信用雷射模组 可靠性评估 Laser modules used for telecommunication - Reliability assessment (IEC 61751:1998)
EN 62107-2001 高级影音光碟 光碟交换系统 规范 Super video compact disc - Disc-interchange system-specification (IEC 62107:2000)
EN 821-2-1997 先进技术陶瓷 单片陶瓷 热物理特性 第2部分:雷射闪烁法(热脉冲法)对热扩散率的测定 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method
EN ISO 11145-2001 光学和光学仪器 雷射和雷射设备 辞彙和符号 Optics and optical instruments - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2001)
EN ISO 11146-1999 雷射和雷射设备 雷射光束参数的试验方法 束宽、发散角和束扩散因数 Lasers and laser-related equipment - Test methods for laser beam parameters - Beam widths, divergence angle and beam propagation factor (ISO 11146:1999)
EN ISO 11149-1997 光学和光学仪器 雷射和雷射设备 非电信雷射设备用光纤连接器 Optics and optical instruments - Lasers and laser-related equipment - Fibre optic connectors for non-telecommunication laser applications (ISO 11149:1997)
EN ISO 11151-1-2000 雷射和雷射设备 标准光学元件 第1部分:紫外线、可见和近红外光谱范围用元件 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral range (ISO 11151-1:2000)
EN ISO 11151-2-2000 雷射和雷射设备 标准光学元件 第2部分:红外光谱范围用元件 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2000)
EN ISO 11254-1-2000 雷射和雷射设备 光学表面雷射导致损伤阈值的测定 第1部分:1-on-1试验 Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1-on-1 test (ISO 11254-1:2000)
EN ISO 11254-2-2001 雷射和雷射设备 光学表面雷射导致损伤阈值的测定 第2部分:S on 1试验 Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S on 1 test (ISO 11254-2:2001)
EN ISO 11551-1997 光学和光学仪器 雷射和雷射设备 光学雷射元件光吸收性试验方法 Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components (ISO 11551:1997)
EN ISO 11554-2003 光学和光学仪器 雷射和雷射设备 雷射光束功率、能量和时间特徵的试验方法 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2003)
EN ISO 11670-2003 雷射和雷射设备 雷射光束参数的试验方法 束定位稳定性 Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability (ISO 11670:2003)
EN ISO 11810-2002 光学及光学仪器 雷射及雷射设备 外科布帘和/或病人防护衣抗雷射照射性的试验方法 Optics and optical instruments - Lasers and laser-related equipment - Test method for the laser-resistance of surgical drapes and/or patient protective covers (ISO 11810:2002)
EN ISO 11990-2003 光学和光学仪器 雷射和雷射设备 导管雷射抗性的测定 Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts (ISO 11990:2003)
EN ISO 12005-2003 雷射和雷射设备 雷射光束参数的试验方法 偏振 Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization (ISO 12005:2003)
EN ISO 13694-2000 光学和光学仪器 雷射和雷射设备 雷射光束能量密度分佈的试验方法 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2000)
EN ISO 13919-1-1996 焊接 电子束和雷射焊接头 缺陷的品质分级指南 第1部分:钢 Welding - Electrons and laser-beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel (ISO 13919-1:1996)
EN ISO 13919-2-2001 焊接 电子束和雷射焊接头 缺陷的品质分级指南 第2部分:铝及其可焊合金 Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2001)
EN ISO 15367-1-2003 雷射及雷射设备 雷射光束波前形状的测试方法 第1部分:术语及基本外貌 Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects (ISO 15367 1:2003)
EN ISO 15614-11-2002 金属焊接工艺的规范和验收 焊接工艺试验 第11部分:电子和雷射光束焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002)
EN ISO 15616-1-2003  高品质焊接及切割用二氧化碳雷射光束机的验收试验 第1部分:一般原则、验收条件 Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003)
EN ISO 15616-2-2003 高品质焊接及切割用二氧化碳雷射光束机的验收试验 第2部分:静止及动态精度的测量 Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003)
EN ISO 15616-3-2003 高品质焊接及切割用二氧化碳雷射光束机的验收试验 第3部分:气流量及气压测量仪的校正 Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003)
EN ISO 17526-2003 光学及光学仪器 雷射及雷射设备 雷射器的寿命 Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers (ISO 17526:2003)
EN ISO 9956-11-1996 金属材料焊接工艺规程及认可 第11部分:雷射光束焊接工艺规程 Specification and approval of welding procedures for metallic materials - Part 11: Welding procedure specification for laser beam welding (ISO 9956-11:1996)
prEN 120014-1992 空白详细规范 同轴接收雷射器 Blank detail specification; coaxial receptable laser
prEN 120017-1992 空白详细规范 光学T(指数O)罐式雷射器 Blank detail specification; optical T<(Index)O> can laser
prEN 1419-1994 电子束和雷射光束的钢焊缝 关于缺陷品质水准的指南 Electron and laser beam welded joints in steel; guidance on quality levels for imperfections
prEN 2266-007-2000 航空航太系列 通用电缆 工作温度 55 ℃ 和 200 ℃ 之间 第007部分:UV雷射可列印的多芯套内电缆 产品 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 200℃ - Part 007: UV laser printable multicore jacketed cable - Product standard
prEN 2267-008-1999 航空航太系列 通用电缆 工作温度 55 ℃ 和 200 ℃ 之间 第008部分:008 DMA 系列 单芯UV雷射列印和多 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 260℃ - Part 008: DM family, single UV laser printable and multicore assembly - Product standard
prEN 2346-004-2001 航空航太系列 耐火电缆 工作温度65 ℃ and 260 ℃之间 第004部分:DN 系列 UV单芯雷射印刷和多芯组装 Aerospace series - Cables, electrical, fire-resistant; Operating temperatures between -65℃ and 260℃ - Teil 004: DN family, single UV laser printable and multicore assembly; Light weight; Product standard
prEN 2713-011-2000 航空航太系列 一般用途的单芯和多芯电缆 工作温度在-55℃和260℃之间 第011部分:遮罩(螺旋)和护套 Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 200℃ - Part 011: Silver plated copper screened (spiral) and jacketed, UV laser printable - Product standard
prEN 2714-011-1999 航空航太系列 一般用途的单芯和多芯电缆 工作温度在-55℃和260℃之间 第011部分:遮罩(螺旋)和护套 Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 260℃ - Part 011: DM family, screened (spiral) and jacketed, UV laser printable - Product standard
prEN 2714-012-1999 航空航太系列 一般用途的单芯和多芯电缆 工作温度在-55℃和260℃之间 第0012部分:遮罩(编织的)和护 Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 260℃ - Part 012: DM family, screened (braided) and jacketed, UV laser printable - Product standard
prEN 288-11-1994 金属材料焊接程式规范和鉴定 第11部分:雷射光束焊的焊接程式规范 Specification and approval of welding procedures for metallic materials - Part 11: Welding procedure specification for laser beam welding
prEN 60825-5-1992 雷射产品的安全 设备分类、要求和用户指南 第5部分:光纤通信安全系统 草案 Radiation safety of laser products; equipment classification, requirements, and users guide; part 5: the safety of optical fibre communications systems
prEN ISO 11553-1-2002 机械安全 雷射加工机械 安全要求 Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO/DIS 11553-1:2002) / Note: Intended as replacement for EN 12626 (1997-02).
prEN ISO 15609-4-2000 金属焊接工艺的规范和验收 焊接工艺规范 第4部分:雷射光束焊 Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO/DIS 15609-4:2000)
编号 中文名称 英文名称

中国雷射标准(GB laser standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |

编号 中文名称 英文名称
GB 10320-1995 雷射设备和设施的电气安全 Electrical safety of laser equipment and installations
GB 10435-1989 作业场所激光辐射卫生标准 Hygienic standard for laser radiation in the work environment
GB 11748-2005 二氧化碳雷射治疗机 Carbon dioxde Laser Treating Intrument
GB 12257-2000 氦氖雷射治疗机通用技术条件 General specification of He-Ne laser medical equipment
GB 18151-2000 雷射防护屏 Laser guards
GB 18217-2000 雷射安全标志 Laser safety signs
GB 18490-2001 雷射加工机械安全要求 Laser processing machines--Safety requirements
GB 7247.1-2001 雷射产品的安全第1部分:设备分类、要求和用户指南 Safety of laser products--Part 1:Equipment classification,requirements and user’s guide
GB 9706.20-2000 医用电气设备第2部分:诊断和治疗雷射设备安全专用要求 Medical electrical equipment--Part 2:Particular requirements for the safety of diagnostic andtherapeutic laser equipment
GB/T 11153-1989 雷射小功率计性能检测方法 Parameters testing method of laser power meter in low range
GB/T 11293-1989 固体雷射材料名词术语 Terms and definitions of solid-state laser materials
GB/T 11295-1989 雷射晶体棒型号命名方法 Designation for laser crystal rods
GB/T 11297.1-2002 雷射棒波前畸变的测量方法 Test method for wavefront distortion of laserrods
GB/T 11297.2-1989 雷射棒侧向散射係数的测量方法 Test method for side direction scatteringcoefficient of laser rods
GB/T 11297.3-2002 掺钕钇铝石榴石雷射棒消光比的测量方法 Test method for extinction ratio of Nd∶YAG laser rods
GB/T 11297.4-1989 掺钕钇铝石榴石雷射棒长脉冲雷射阈值及斜率效率的测量方法 Test method fornormal pulse lasing threshold and slope efficiency of Nd:YAG laser rods
GB/T 11297.5-1989 掺钕钇铝石榴石雷射棒连续雷射阈值、斜率效率和输出功率的测量方法 Test method for continuous lasing threshold, slope efficiency and output power of Nd∶YAG laser rods
GB/T 12082-1989 气体雷射器文字符号 Letter symbols for gas lasers
GB/T 12083-1989 气体雷射器电源系列 Power supply series for gas lasers
GB/T 12377-1990 空气中微量铀的分析方法雷射萤光法 Analytical method of microquantity uranium in air by laser-fluoremetry
GB/T 13739-1992 激光辐射横模鉴别方法 Testing method of transverse mode of laser radiation
GB/T 13740-1992 激光辐射发散角测试方法 Testing method of divergence angle of laser radiation
GB/T 13741-1992 激光辐射光束直径测试方法 Testing method of beam diameter of laser radiation
GB/T 13842-1992 掺钕钇铝石榴石雷射棒 Neodymium-doped yttrium aluminium garnet laser rods
GB/T 13863-1992 激光辐射功率测试方法 Testing method for laser radiant power
GB/T 13864-1992 激光辐射功率稳定度测试方法 Testing method for laser radiant power stability
GB/T 14078-1993 氦氖雷射器技术条件 He-Ne laser specification
GB/T 14128-1993 掺铷钇铝石榴石雷射棒尺寸系列 Dimension series for neodymium-doped yttrium aluminium garnet laser rods
GB/T 15175-1994 固体雷射器主要参数测试方法 Measurement methods for main parameter of solid-state lasers
GB/T 15301-1994 气体雷射器总规范 General specification for gas lasers
GB/T 15313-1994 雷射术语 Terminology for laser
GB/T 15490-1995 固体雷射器总规范 General specification for solid state lasers
GB/T 15649-1995 半导体雷射二极体空白详细规范 Blank detail specification for semiconductor laser diodes
GB/T 15860-1995 雷射唱机通用技术条件 General specification for compact disc players
GB/T 16601-1996 光学表面雷射损伤阈值测试方法第1部分:1对1测试 Test methods for laser induced damage threshold of optical surfaces--Part 1: 1 on 1 test
GB/T 17540-1998 台式雷射印表机通用规范 General specification for desktop laser printer
GB/T 17736-1999 雷射防护镜主要参数测试方法 Testing method of main parameters for laserprotective eyewear
GB/T 18683-2002 钢铁件雷射表面淬火 Laser surface hardening of iron and steel parts
GB/T 18904.2-2002 半导体器件第12-2部分:光电子器件纤维光学系统或子系统用带尾纤的雷射二极体模组空白详细规范 Semiconductor devices--Part 12-2:Optoelectronic devices--Blank detail specification for laser diodes modules with pigtail for fiber optic systems or sub-systems
GB/T 19077.1-2003 粒度分析雷射衍射法 Particle size analysis--Laser diffraction method
GB/T 20485.11-2006 振动与冲击感测器校准方法第11部分:雷射干涉法振动绝对校准 Methods for the calibration of vibration and shock transducers - Part 11: Primary vibration calibration by laser interferometry
GB/T 20485.13-2007 振动与冲击感测器校准方法 第13部分: 雷射干涉法冲击绝对校准 ()
GB/T 20722-2006 雷射加工机器人 通用技术条件 General specifications of laser processing robots
GB/T 21199-2007 雷射印表机干式单组份显影剂 ()
GB/T 21200-2007 雷射印表机干式双组份显影剂用色调剂 ()
GB/T 21201-2007 雷射印表机干式双组份显影剂 ()
GB/T 4799-2001 雷射器型号命名方法 The type designation for laseres
GB/T 6360-1995 雷射功率能量测试仪器规范 Specification for laser radiation power and energy measuring equipment
GB/T 6598-1986 小角雷射光散射法测定聚苯乙烯标准样品的重均分子量 Determination of weight-average molecular weight of polystyrene standards by low angle laser light scattering method
GB/T 7257-1987 氦氖雷射器参数测试方法 Measurement methods of parameter for helium neon laser
GB/Z 18461-2001 雷射产品的安全生产者关于激光辐射安全的检查清单 Safety of laser products--Manufacturer’s checklist for radiation safety of laser products
GB/Z 18462-2001 雷射加工机械金属切割的性能规范与标准检查程式 Laser processing machines--Performance specifications and benchmarks for cutting of metals
HG/T 2172-2003 红雷射影像记录片 ()
JB/T 10334-2002 雷射印表机测试版(A4) ()
JB/T 10406-2004 内燃机 雷射淬火气缸套 技术条件 ()
JB/T 10454-2004 雷射印表机负电性有机光导鼓 技术条件 ()
JB/T 10625-2006 雷射选区烧结快速成形机床 技术条件 Selective laser sintering prototyping machines-Technical requirements
JB/T 10626-2006 立体光固化雷射快速成形机床 技术条件 Stereolifhography laser prototyping machines-Technical requirements
JB/T 10741-2007 雷射印表机充电辊 技术条件 Specification of the primary charging roller for laser printer
JB/T 10785-2007 大功率横流连续波二氧化碳雷射器 The high power transverse flow continuous wave CO2 lasers
JB/T 5524-1991 实验室雷射 安全规则 ()
JB/T 5610-2006 雷射干涉仪 Laser interferometer
JB/T 5748-1991 红宝石雷射器 主要参数测试方法 ()
JB/T 5749-1991 钕玻璃雷射器 主要参数测试方法 ()
JB/T 6249-1992 氦镉雷射器 主要参数测试方法 ()
JB/T 6250.1-1992 YAG 连续雷射器 主要参数测试方法 ()
JB/T 6250.2-1992 YAG 脉冲雷射器 主要参数测试方法 ()
JB/T 6859-1993 气体雷射器 主要参数 ()
JB/T 6860-1993 测量激光辐射功率能量的探测器、仪器与设备 ()
JB/T 7795-1995 雷射器和与雷射有关的设备 机械介面 ()
JB/T 9317-1999 雷射指向仪 ()
JB/T 9326-1999 雷射喇曼分光光度计 ()
JB/T 9489-1999 氩离子雷射器 主要参数 测试方法 ()
JB/T 9490-1999 二氧化碳雷射器 主要参数 测试方法 ()
JB/T 9491-1999 氦氖雷射器 主要参数 测试方法 ()
JB/T 9492-1999 钇铝石榴石雷射器 参数系列 ()
JC/T 721-2006 水泥颗粒级配测定方法 雷射法 ()
MT 870-2000(2005) 煤矿用防爆雷射指向仪 ()
QB/T 1730-1993 氦氖雷射传真胶片 ()
SH/T 1612.8-2005 工业用精对苯二甲酸粒度分佈的测定——雷射衍射法 ()
SY/T 6131-1995 碎屑岩粒度的测定 雷射法 ()
YS/T 617.7-2007 铝、镁及其合金粉理化性能测定方法 第7部分 粒度分佈的测定 雷射散射/衍射法 Determination of chemical compositions and physical properties of aluminum powder,magnesium powder and Al-Mg alloy powder Part 7 Determination of particle size distribution Laser scatterance/diffraction method
编号 中文名称 英文名称

日本雷射标准(JIS laser standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |

编号 中文名称
日本语标题
英文名称
JIS C5940-1997 光纤传输用雷射二极体总则
光伝送用半导体レーザ通则
General rules of laser diodes for fiber optic transmission
JIS C5941-1997 光纤传输用雷射二极体测量方法
光伝送用半导体レーザ测定方法
Measuring methods of laser diodes for fiber optic transmission
JIS C5942-1997 录放用雷射二极体总则
再生及び记録用半导体レーザ通则
General rules of laser diodes used for recording and playback
JIS C5943-1997 录放用雷射二极体测量方法
再生及び记録用半导体レーザ测定方法
Measuring methods of laser diodes used for recording and playback
JIS C5944-2005 光纤传输用雷射二极体设备的一般原则
光伝送用半导体レーザモジュール通则
General rules of laser diode modules for fiber optic transmission
JIS C5945-2005 光纤传输用雷射二极体设备的测量方法
光伝送用半导体レーザモジュール测定方法
Measuring methods of laser diode modules for fiber optic transmission
JIS C5946-2005 光学纤维放大镜用雷射二极体模件的一般规则
光ファイバ増幅器用半导体レーザモジュール通则
General rules of laser diode modules for optical fiber amplifier
JIS C5947-2005 光学纤维放大镜用雷射二极体模件的测量方法
光ファイバ増幅器用半导体レーザモジュール测定方法
Measuring methods of laser diode modules for optical fiber amplifier
JIS C6180-1991 雷射输出功率的测量方法
レーザ出力测定方法
Measuring methods for laser output power
JIS C6181-1995 激光辐射功率和能量测量用检波器、仪器和设备
レーザ放射パワー及びエネルギー测定用検出器,测定器及び测定装置
Power and energy measuring detectors, instruments and equipment for laser radiation
JIS C6182-1991 雷射光束用光强度仪的试验方法
レーザビーム用光パワーメータ试験方法
Test methods of optical power meters for laser beam
JIS C6801-1988 雷射安全的术语彙编
レーザ安全用语
Glossary of terms used in laser safety
JIS C6802-2005 雷射产品的安全性
レーザ製品の安全基准
Safety of laser products
JIS C6803-2006 雷射产品的安全.光纤通信系统的安全
レーザ製品の安全―光ファイバ通信システムの安全
Safety of laser products -- Safety of optical fibre communication systems
JIS H7801-2005 用雷射闪烁法测量金属的热扩散性的方法
金属のレーザフラッシュ法による热拡散率の测定方法
Method for measuring thermal diffusivity of metals by the laser flash method
JIS K5600-9-3-2006 涂料的试验方法.第9部分:涂料粉末.第3节:用雷射衍射进行粒度分析
涂料一般试験方法―第9部:粉体涂料―第3节:レーザ回折による粒度分佈の测定方法
Testing methods for paints -- Part 9: Coating powders -- Section 3: Particle size analysis by laser diffraction
JIS R1611-1997 雷射闪烁法测定精细陶瓷的热扩散率、比热容量、热传导率试验方法
ファインセラミックスのレーザフラッシュ法による热拡散率・比热容量・热伝导率试験方法
Test methods of thermal diffusivity, specific heat capacity, and thermal conductivity for fine ceramics by laser flash method
JIS R1629-1997 雷射衍射法对细陶瓷原料粉末的粒子尺寸分佈进行的测定
ファインセラミックス原料のレーザ回折・散乱法による粒子径分佈测定方法
Determination of particle size distributions for fine ceramic raw powders by laser diffraction method
JIS R1667-2005 用雷射闪烁法测定连续纤维增强陶瓷基体複合物的热扩散性
长繊维强化セラミックス複合材料のレーザフラッシュ法による热拡散率测定方法
Determination of thermal diffusivity of continuous fiber-reinforced ceramic matrix composites by the laser flash method
JIS R3251-1995 用雷射干涉法检测低膨胀玻璃的线性热膨胀係数的测量方法
低膨张ガラスのレーザ干渉法による线膨张率の测定方法
Measuring method of the linear thermal expansion coefficient for low expansion glass by laser interferometry
JIS R3252-1994 雷射干涉仪检测玻璃匀质性的测量方法
ガラスのレーザ干渉法による均质度の测定方法
Measuring method for the homogeneity of glasses by laser interferometry
JIS T1204-1988 雷射凝固仪
レーザ光凝固装置
Laser photocoagulators
JIS T8143-1994 防雷射照射的滤光器和护目器
レーザ保护フィルタ及びレーザ保护めがね
Filters and eye-protectors against laser radiation
JIS Z8825-1-2001 粒度分析.雷射衍射法.第1部分:一般原理
粒子径解析 ― レーザー回折法 ― 第1部:测定原理
Particle size analysis -- Laser diffraction methods -- Part 1: General principles
编号 中文名称
日本语标题
英文名称

法国雷射标准(NF laser standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |

编号 中文名称 英文名称
NF A80-232-1999 有氧火焰切割,雷射光束切割和原生质切割检验.术语(欧洲标准EN 12584) (IMPERFECTIONS IN OXYFUEL FLAME CUTS, LASER BEAM CUTS AND PLASMA CUTS. TERMINOLOGY. (EUROPEAN STANDARD EN 12584).)
NF A89-010-11-1996 金属材料焊接工艺的验收和规范.第11部分:雷射光束焊接工艺规范 (SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 11 : WELDING PROCEDURE SPECIFICATION FOR LASER BEAM WELDING. (EUROPEAN STANDARD EN ISO 9956-11).)
NF A89-057-11-2002 金属材料焊接程式规范和鉴定.焊接程式试验.第11部分:电子和雷射射线焊接 (Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11 : electron and laser beam welding.)
NF A89-233-1996 焊接.电子束和雷射光束焊接接头.缺陷的品质级别导则.第1部分:钢 (WELDING. ELECTRONS AND LASER BEAM WELDED JOINTS. GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS. PART 1 : STEEL. (EUROPEAN STANDARD EN ISO 13919-1).)
NF A89-234-2001 焊接.电子和雷射光束焊接接头.缺陷的品质级别导则.第1部分:铝及其可焊合金 (Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2 : aluminium and its weldable alloys.)
NF A89-701-1-2003 CO2雷射切割、焊接机的验收试验.第1部分:通用原理和验收条件 (Acceptance tests for CO2-laser beam machines for welding and cutting - Part 1 : general principles, acceptance conditions.)
NF A89-701-2-2003 CO2雷射切割、焊接机的验收试验.第2部分:静态和动态准确度的测定 (Acceptance tests for CO2-laser beam machines for welding and cutting - Part 2 : measurement of static and dynamic accuracy.)
NF A89-701-3-2003 CO2雷射切割、焊接机的验收试验.第3部分:气体流量和压力测量仪的校准 (Acceptance tests for CO2-laser beam machines for welding and cutting - Part 3 : calibration of instruments for measurement of gas flow and pressure.)
NF B41-214-1997 高技术陶瓷.单片陶瓷.热物理特性.第2部分:雷射闪烁(或热脉冲)法测定热扩散率 (ADVANCED TECHNICAL CERAMICS. MONOLITHIC CERAMICS. THERMO-PHYSICAL PROPERTIES. PART 2 : DETERMINATION OF THERMAL DIFFUSIVITY BY THE LASER FLASH (OR HEAT PULSE) METHOD. (EUROPEAN STANDARD EN 821-2).)
NF C43-803-1993 雷射辐射功率和能量测量用探测器、仪器和设备 (Power and energy measuring detectors, instruments and equipment for laser radiation.)
NF C43-805-1994 雷射产品的安全.第1部分:设备分类、要求和用户指南 (Safety of laser products - Part 1 : equipment classification, requirements and user`s guide.)
NF C43-805/A11-2000 雷射产品的安全.第1部分:器材的分类、要求和用户指南 (Safety of laser products - Part 1 : equipment classification, requirements and user's guide.)
NF C43-806-1994 雷射产品的安全.第2部分:光纤通信系统的安全 (Safety of laser products. Part 2 : safety of optical fibre communication systems.)
NF C74-341-1996 医疗电气设备.第2部分:诊断和治疗用雷射设备安全性特殊要求 (Medical electrical equipment. Part 2 : particular requirements for the safety of diagnostic and therapeutic laser equipment.)
NF C93-806-1998 远端通信用雷射模组.可靠性评估 (Laser modules used for telecommunication. Reliability assessment.)
NF C97-133-1993 预录光学反射视盘系统.50Hz/625行PAL制“影音光碟“ (Pre-recorded optical reflective videodisk system. “laser vision“ 50 hz/625 lines Pal.)
NF C97-134-1992 影音光碟系统.12cm CD-V.(欧洲标准EN 61104) (Compact disc video system 12 cm CD-V.)
NF C97-140-2001 高级影音光碟.光碟交换系统.规范 (Super video compact disc - Disc-interchange system - Specification.)
NF E60-601-1997 机械装置的安全.雷射加工机械.安全要求 (Safety of machinery. Laser processing machines. Safety requirements.)
NF S10-100-1994 雷射和相关设备.雷射装置.文献的最低要求(EN 32152) (LASERS AND LASER-RELATED EQUIPMENT. LASER DEVICE. MINIMUM REQUIREMENTS FOR DOCUMENTATION. (EUROPEAN STANDARD EN 31252).)
NF S10-101-1994 雷射和相关设备.雷射装置.机械介面(EN 31253) (LASERS AND LASER-RELATED EQUIPMENT. LASER DEVICE. MECHANICAL INTERFACES. (EUROPEAN STANDARD EN 31253).)
NF S10-102-1997 光学和光学仪器.雷射及雷射相关设备.非电信雷射设备用光纤连接器 (Optics and optical instruments. Lasers and laser-related equipment. Fibre optic connectors for non-telecommunication laser applications.)
NF S10-105-2002 光学和光学仪器.雷射和雷射相关设备.辞彙和符号 (Optics and optical instruments - Lasers and laser-related equipment - Vocabulary and symbols.)
NF S10-112-1-2000 雷射和雷射相关设备.光学表面的雷射诱导损坏阈测定.第1部分:合在一起的试验 (Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1 on 1 test.)
NF S10-112-2-2001 雷射和雷射相关设备.光学表面雷射诱导损伤阈的测定.第2部分:S-on-1试验 (Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2 : S-on-1 test.)
NF S10-113-1997 光学和光学仪器.雷射和与雷射相关的设备.光学雷射元件光吸收性测试 (Optics and optical instruments. Lasers and laser-related equipment. Test method for absorptance of optical laser components.)
NF S10-121-2003 光学和光学仪器.雷射和相关雷射设备.雷射光束功率、能量和时间特徵的试验方法 (Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics.)
NF S10-122-2003 雷射和雷射设备.雷射光束参数的试验方法:束定位稳定性 (Lasers and laser-related equipment - Test methods for laser beam parameters : Beam positional stability.)
NF S10-124-2000 光学和光学设备.雷射和雷射相关设备.雷射光束能量密度分佈的试验方法 (Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution.)
NF S10-128-2003 光学和光学仪器.雷射和雷射相关设备.雷射器的寿命 (Optics and optical instruments - Lasers and laser-related equipments - Lifetime of lasers.)
NF S77-111-1998 个人眼睛保护.防止雷射辐射的滤膜和眼睛保护器(雷射眼保护器) (Personal eye-protection. Filters and eye-protectors against laser radiation (laser eye-protectors).)
NF S77-111/A1-2002 人眼防护.防雷射辐射滤光镜和护目镜(雷射护目镜) (Personal eye-protection - Filters and eye-protectors against laser radiation (laser eye-protectors).)
NF S77-112-1998 个人眼睛保护.用于雷射和雷射系统调准工作的眼保护器(雷射调节眼保护器)(欧洲标准208) (Personal eye-protection. Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors).)
NF S77-112/A1-2002 人眼防护.在雷射器和雷射系统上作校准工作用的眼镜防护装置(雷射校准护目镜) (Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors).)
NF S77-126-1999 雷射工作场所用遮罩物.安全要求和试验 (Screens for laser working places. Safety requirements and testing.)
NF S77-126/A1-2002 雷射工作场所用遮罩物.安全要求和试验 (Screens for laser working places - Safety requirements and testing.)
NF S95-170-2000 光学和光学仪器.雷射和雷射相关设备.气管导管柄雷射阻力的测定 (Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts.)
NF S97-132-2003 光学和光学仪器.雷射和雷射相关设备.手术单和/或病人保护罩耐雷射性的试验方法 (Optics and optical instruments - Lasers and laser-related equipment - test method for the laser-resistance of surgical drapes and/or patient-protective covers.)
NF V37-012-1998 捲烟和过滤咀.公称直径的测定.使用雷射光束测量仪器的方法 (Cigarettes and filter rods. Determination of nominal diameter. Method using a laser beam measuring apparatus.)
NF X11-666-1-2000 颗粒尺寸分析.雷射衍射方法.第1部分:一般规则 (Particle size analysis - Laser diffraction methods - Part 1 : general principles.)
编号 中文名称 英文名称
(0512)5776-4900

您有任何疑问吗? 立即联络我们

kson@kson.cn

需要设备谘询? 写信给我们

Mon – Fri 08:30 – 17:00

服务时间

昆山庆声电子科技有限公司

昆山总部-江苏省昆山市周市镇陆杨迎宾西路3号

联络电话: (0512)5776-4900

传真电话: (0512)5776-4300