■在线学习>LD雷射二极管规范列表

作者:江志宏        

LD雷射二极管规范列表

说明:
      
雷射是由英文字 LASER的音译而来。而 LASER这个字是取自 Light Amplification by Stimulated Emission of Radiation 字符串的头一个字母拼凑而来,雷射二极管(laser diode,简称:LD)是某些发光效率特别好的二极管加上光学的共振腔形成,体积比传统的固态雷射或气体雷射小很多,

         由于半导体雷射比传统型雷射具有很多优点,比如说轻薄短小、耐震、耗电少、反应快、耐冲撞、寿命长、效率高、方向性佳及输出功率高等特性,适合供作长距离、大容量之通信用光源及存取高密度记录媒体(蓝光),目前也有应用于需要高亮度的微投影。


雷射光其主要特色有:
(1)雷射光为单色光,其频率宽度很窄。
(2)雷射光线为平行光线,其指向性很高,经过长距离后,仍能维持细小光束而不散开。
(3)雷射光之集光性佳,能
量密度较高

雷射二极管分类:

雷射二极管波长分类与用途:

 

CNS规范列表:

规范

中文说明

CNS 11640 雷射安全使用标准
CNS 15016-1 雷射产品安全-第1部:设备分类、要求和用户指南
CNS 15016-2 雷射产品安全-第2部:光纤通讯系统之安全性
CNS 11715 一般用激光唱机检验法
CNS 13648 通信用雷射二极管量测法
CNS 13649 通信用雷射二极管之可靠度测试
CNS 13650 通信用雷射二极管之批质量控制测试
CNS 14181 光纤通信用模拟视讯雷射传输和接收模块之性能量测法
CNS 14182 光纤通信用模拟视讯雷射传输和接收模块之可靠度及批质量控制测试
 

ISO雷射标准(ISO laser standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |  DIC

编号

中文名称

英文名称

IEC 60601-2-22-1995

医用电气设备 第2-22部分:诊断和治疗用 雷射设备安全的特殊要求

Medical electrical equipment - Part 2: Particular requirements for the safety of diagnostic and therapeutic laser equipment

IEC 60747-5-4-2006

半导体器件.分立器件.5-4部分:光电器件.半导体激光器

Semiconductor devices - Discrete devices - Part 5-4: Optoelectronic devices - Semiconductor lasers

IEC 60825-1 AMD 1-1997

雷射产品的安全 第1部分:设备分类、要求和使用者指南 修改1

Safety of laser products - Part 1: Equipment classification, requirements and user's guide; Amendment 1

IEC 60825-1 AMD 2 Corrigendum 1-2002

雷射产品的安全.1部分:设备分类、要求和使用者指南.修改件2

Safety of laser products - Part 1: Equipment classification, requirements and user's guide; Amendment 2

IEC 60825-1 AMD 2-2001

雷射产品的安全 第1部分:设备分类、要求和使用者指南 修改2

Safety of laser products - Part 1: Equipment classification, requirements and user's guide; Amendment 2

IEC 60825-1 Edition 1.2-2001

雷射产品的安全.1部分:设备分类、要求和使用者指南

Safety of laser products - Part 1: Equipment classification, requirements and user's guide

IEC 60825-1-1993

雷射产品的安全 第1部分:设备分类、要求和使用者指南

Safety of laser products; part 1: equipment classification, requirements and user's guide

IEC 60825-12-2005

雷射产品的安全.12部分:用于信息传输的自由空间光通信系统的安全

Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information

IEC 60825-2-2005

雷射产品的安全.2部分:光纤通信系统的安全(OFCS)

Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)

IEC 60825-4-2006

雷射产品的安全.4部分:雷射防护器

Safety of laser products - Part 4: Laser guards

IEC 60856 AMD 1-1991

预录光学反射视讯光盘系统 “激光视盘” 50Hz/625PAL制 修改1

Pre-recorded optical reflective videodisk system; "laser vision" 50 Hz/625 lines; PAL; amendment 1

IEC 60856 AMD 2-1997

预录光学反射视讯光盘系统 “激光视盘” 50Hz/625 PAL制 修改2

Pre-recorded optical reflective videodisk system "Laser vision" 50 Hz/625 lines - PAL; Amendment 2

IEC 60856-1986

预录光学反射视讯光盘系统 “激光视盘” 50Hz/625 PAL

Pre-recorded optical reflective videodisk system. "Laser vision" 50 Hz/625 lines - PAL

IEC 60857 AMD 1-1991

预录光学反射视讯光盘系统 “激光视盘” 60Hz/525 M/NTSC制 修改1

Pre-recorded optical reflective videodisk system; "laser vision" 60 Hz/525 lines; M/NTSC; amendment 1

IEC 60857 AMD 2-1997

预录光学反射视讯光盘系统 “激光视盘” 60Hz/525 M/NTSC制 修改2

Pre-recorded optical reflective videodisk system - "Laser vision" 60 Hz/525 lines - M/NTSC; Amendment 2

IEC 60857-1986

预录光学反射视讯光盘系统 “激光视盘” 60Hz/525 M/NTSC

Pre-recorded optical reflective videodisk system. "Laser vision" 60 Hz/525 lines - M/NTSC

IEC 61040-1990

激光辐射用功率和能量测量探测器、仪器和设备

Power and energy measuring detectors, instruments and equipment for laser radiation

IEC 61096 AMD 1-1996

数字音讯雷射唱盘重放设备特性的测量方法 修改1

Methods of measuring the characteristics of reproducing equipment for digital audio compact discs; Amendment 1

IEC 61096-1992

数字音讯雷射唱盘重放设备特性的测量方法

Methods of measuring the characteristics of reproducing equipment for digital audio compact discs

IEC 61280-1-4-2003

纤维光学通信子系统试验程序.1-4部分:一般通信子系统.多模纤维 雷射发射机用二维近场数据的采集和换算

Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems; Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters

IEC 61280-2-10-2005

纤维光学通信子系统试验程序.2-10部分:数字系统.雷射发射器的时间分辨线性调频脉冲和α指数测量

Fibre optic communication subsystem test procedures - Part 2-10: Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters

IEC 61751-1998

通信用雷射模块 可靠性评定

Laser modules used for telecommunication - Reliability assessment

IEC 62107-2000

高级激光视盘 光盘交换系统 规范

Super Video Compact Disc - Disc-interchange system-specification

IEC 62148-11-2003

光纤有源组件及器件.包装和接口标准.11部分:14针调制器集成 雷射二极管发射机

Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator-integrated laser diode transmitters

IEC 62148-12-2004

纤维光学有源组件和器件.包装和接口标准.12部分:带同轴RF连接器的 雷射传输器

Fibre optic active components and devices - Package and interface standards - Part 12: Laser transmitters with a coaxial RF connector

IEC 62149-3-2004

纤维光学有源组件和器件.性能标准.3部分:2.5Gbit/s调制器-集成 雷射二极管发射机

Fibre optic active components and devices - Performance standards - Part 3: 2,5 Gbit/s modulator-integrated laser diode transmitters

IEC/TR 60825-10-2002

雷射制品的安全性.10部分:IEC 60825-1的应用导则和注释

Safety of laser products - Part 10: Application guidelines and explanatory notes to IEC 60825-1

IEC/TR 60825-13-2006

雷射产品的安全.13部分:雷射产品分类测量

Safety of laser products - Part 13: Measurements for classification of laser products

IEC/TR 60825-14-2004

雷射产品安全.14部分:使用者指南

Safety of laser products - Part 14: A user's guide

IEC/TR 60825-5-2005

雷射产品安全性.5部分:IEC 60825-1的制造商检查清单

Safety of laser products - Part 5: Manufacturer's checklist for IEC 60825-1

IEC/TR 60825-8-1999

雷射产品的安全 第8部分:医疗 雷射设备安全使用指南

Safety of laser products - Part 8: Guidelines for the safe use of medical laser equipment

IEC/TR 60825-9-1999

雷射产品的安全 第9部分:非相干光辐射最大允许曝光量的汇集

Safety of laser products - Part 9: Compilation of maximum permissible exposure to incoherent optical radiation

IEC/TR3 60825-3-1995

雷射产品的安全 第3部分:雷射显示器和指示器指南

Safety of laser products - Part 3: Guidance for laser displays and shows

ISO 10110-17-2004

光学和光学仪器.光学组件和系统制图准备.17部分:激光辐射损害阈

Optics and photonics - Preparation of drawings for optical elements and systems - Part 17: Laser irradiation damage threshold

ISO 11145-2006

光学和光子学.雷射和雷射设备.词汇和符号

Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols

ISO 11146-1-2005

雷射和雷射相关设备.激光束宽度、发散角和束扩散率的试验方法.1部分:无象散和简单象散束

Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams

ISO 11146-2-2005

雷射和雷射相关设备.激光束宽度、发散角和束扩散率的试验方法.2部分:一般像散束

Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams

ISO 11151-1-2000

雷射和雷射设备 标准光学组件 第1部分:紫外线、可见和近红外光谱范围用组件

Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges

ISO 11151-2-2000

雷射和雷射设备 标准光学组件 第2部分:红外光谱范围用组件

Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range

ISO 11252-2004

雷射和雷射设备.雷射装置.对档的最低要求

Lasers and laser-related equipment - Laser device - Minimum requirements for documentation

ISO 11254-1-2000

雷射和雷射设备 光学表面雷射导致损伤阈值的测定 第1部分:1-on-1试验

Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1-on-1 test

ISO 11254-2-2001

激光器和雷射相关设备 雷射导致光学表面损伤阈值的确定 第2部分:S-on-1 试验

Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S-on-1 test

ISO 11551-2003

光学和光学仪器.雷射和雷射设备.光学 雷射组件光吸收性试验方法

Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components

ISO 11553-1-2005

机械安全.雷射加工机械.1部分:一般安全要求

Safety of machinery - Laser processing machines - Part 1: General safety requirements

ISO 11554-2006

光学和光子学.雷射和雷射设备.激光束功率、能量和时间特征的试验方法

Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics

ISO 11670 Technical Corrigendum 1-2004

雷射和雷射相关设备.激光束参数的试验方法.束位置稳定性.技术勘误1

Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability; Technical Corrigendum 1

ISO 11670-2003

雷射和雷射设备.激光束参数的试验方法.束定位稳定性

Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability

ISO 11810-1-2005

雷射和雷射相关设备.手术布单和/或病人保护覆盖物耐 雷射性的试验方法和分类.1部分:基本点燃和穿透性

Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Part 1: Primary ignition and penetration

ISO 11990-2003

光学和光学仪器.雷射和雷射设备.气管柄 雷射抗性的测定

Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts

ISO 12005-2003

雷射和雷射设备.激光束参数的试验方法.偏振

Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization

ISO 13320-1-1999

细微性分析 雷射衍射法 第1部分:一般原则

Particle size analysis - Laser diffraction methods - Part 1: General principles

ISO 13694 Technical Corrigendum 1-2005

光学和光学仪器.雷射和雷射设备.激光束能量密度分布的试验方法.技术勘误1

Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution; Technical Corrigendum 1

ISO 13694-2000

光学和光学仪器 雷射和雷射设备 激光束能量密度分布的试验方法

Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power [energy] density distribution

ISO 13695-2004

光学和光子学.雷射及其相关设备.雷射光谱特性的试验方法

Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers

ISO 13697-2006

光学和光子学.雷射和雷射相关的设备.光学 雷射组件的镜面反射率和正透视度的试验方法

Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components

ISO 13919-1-1996

焊接 电子束和雷射焊接头 缺陷的质量分级指南 第1部分:

Welding - Electron and laser-beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel

ISO 13919-2-2001

焊接 电子束和激光束焊接接头 缺陷质量等级指南 第2部分:铝及其可焊合金

Welding - Electron and laser beam welded joints; Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys

ISO 14408-2005

雷射手术用气管掐管.标识及附带信息要求

Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information

ISO 15367-1-2003

雷射及雷射相关设备.激光束波前形状测定用试验方法.1部分:术语和基础领域

Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects

ISO 15367-2-2005

雷射及雷射相关设备.激光束波前形状测定用试验方法.2部分:Shack-Hartmann传感器

Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 2: Shack-Hartmann sensors

ISO 15609-4-2004

金属材料的焊接程序规范和鉴定.焊接程序规范.4部分:激光束焊接

Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding

ISO 15614-11-2002

金属材料焊接程序的规范和鉴定.焊接程序试验.11部分:电子和激光束焊接

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding

ISO 15616-1-2003

高质量焊接和切割用CO2雷射射线机的验收试验.1部分:通用原理和验收条件

Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions

ISO 15616-2-2003

高质量焊接和切割用CO2雷射射线机的验收试验.2部分:静态和动态准确度的测定

Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy

ISO 15616-3-2003

高质量焊接和切割用CO2雷射射线机的验收试验.3部分:气体流量和压力测量仪的校正

Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure

ISO 16063-11-1999

振动与冲击传感器的校准方法 第11部分:雷射干涉法作主要的振动校准

Methods for the calibration of vibration and shock transducers - Part 11: Primary vibration calibration by laser interferometry

ISO 16063-13-2001

振动和冲击传感器的校准方法 第13部分:用 雷射干涉法的基本校准

Methods for the calibration of vibration and shock transducers - Part 13: Primary shock calibration using laser interferometry

ISO 17123-6-2003

光学和光学仪器.大地测量和测绘仪器的现场试验规程.6部分:旋转激光器

Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 6: Rotating lasers

ISO 17526-2003

光学和光学仪器.激光器和雷射相关设备.激光器的使用寿命

Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers

ISO 17658-2002

焊接.氧气火焰切割、激光束切割和等离子体切割的缺陷

Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology

ISO 18755-2005

细陶瓷(高级陶瓷、高级工业陶瓷).用 雷射闪光法测定块体陶瓷的热扩散

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thermal diffusivity of monolithic ceramics by laser flash method

ISO 22826-2005

金属材料焊缝的破坏性试验.雷射和电子束焊接窄接头的硬度试验(维氏和努氏硬度试验)

Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)

ISO 22827-1-2005

Nd:YAG雷射射线焊接机器的加速试验.带光纤传送的机器.1部分:雷射装配

Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 1: Laser assembly

ISO 22827-2-2005

Nd:YAG雷射射线焊接机器的加速试验.带光纤传送的机器.2部分:移动装置

Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 2: Moving mechanism

ISO 2971-1998

卷烟和过滤嘴 公称直径的测定 使用激光束测量仪的方法

Cigarettes and filter rods - Determination of nominal diameter - Method using a laser beam measuring apparatus

ISO 6161-1981

个人用护目镜 防激光辐射的滤光镜和护目镜

Personal eye-protectors; Filters and eye-protectors against laser radiation

ISO 8130-13-2001

粉末涂料 第13部分:采用雷射衍射的细微性分析

Coating powders - Part 13: Particle size analysis by laser diffraction

ISO/TR 11146-3 Technical Corrigendum 1-2005

雷射和雷射相关设备.激光束宽度、发散角度和束扩散率的试验方法.3部分:本征的和几何的激光束分类、扩散和

Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods; Technical Corrigendum 1

ISO/TR 11146-3-2004

雷射和雷射相关设备.激光束宽度、发散角度和束扩散率.3部分:内在和几何激光束分类、扩散和试验方法细节

Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods

ISO/TR 11552-1997

雷射和雷射设备 雷射材料处理机械 性能规范和金属材料切削基准

Lasers and laser-related equipment - Laser materials-processing machines - Performance specifications and benchmarks for cutting of metals

ISO/TR 11991-1995

上呼吸道雷射手术中通气管理指南

Guidance on airway management during laser surgery of upper airway

ISO/TR 17671-6-2005

焊接.金属材料焊接建议.6部分:激光束焊接

Welding - Recommendations for welding of metallic materials - Part 6: Laser beam welding

ISO/TR 22588-2005

光学和光子学.雷射和雷射相关设备.雷射光学组件感应吸收效应的测量和评估

Optics and photonics - Lasers and laser-related equipment - Measurement and evaluation of absorption-induced effects in laser optical components

ISO/TS 17477-2003

使用2维移动光学型激光器的焊接和切割用CO2激光束机器的验收试验

Acceptance tests for CO<(Index)2>-laser beam machines for welding and cutting using 2D moving optics type

编号

中文名称

英文名称

其它相关试验文章:

  LD雷射二极管规范 LD雷射二极管规范
  LED专有名词 LED专有名词
  LED规范列表 LED规范列表
  LED交通号志试验 LED交通号志试验
  LED路灯试验规范 LED路灯试验规范
  发光二极管试验 通讯用发光二极管试验
  道路用文字LED试验 道路用文字LED试验