■在线学习>LD雷射二极管规范列表

作者:江志宏        

LD雷射二极管规范列表

说明:
   
雷射是由英文字 LASER的音译而来。而 LASER这个字是取自 Light Amplification by Stimulated Emission of Radiation 字符串的头一个字母拼凑而来,雷射二极管(laser diode,简称:LD)是某些发光效率特别好的二极管加上光学的共振腔形成,体积比传统的固态雷射或气体雷射小很多,

    由于半导体雷射比传统型雷射具有很多优点,比如说轻薄短小、耐震、耗电少、反应快、耐冲撞、寿命长、效率高、方向性佳及输出功率高等特性,适合供作长距离、大容量之通信用光源及存取高密度记录媒体(蓝光),目前也有应用于需要高亮度的微投影。


雷射光其主要特色有:
(1)雷射光为单色光,其频率宽度很窄。
(2)雷射光线为平行光线,其指向性很高,经过长距离后,仍能维持细小光束而不散开。
(3)雷射光之集光性佳,能
量密度较高

雷射二极管分类:

雷射二极管波长分类与用途:

 

CNS规范列表:

规范

中文说明

CNS 11640 雷射安全使用标准
CNS 15016-1 雷射产品安全-第1部:设备分类、要求和用户指南
CNS 15016-2 雷射产品安全-第2部:光纤通讯系统之安全性
CNS 11715 一般用激光唱机检验法
CNS 13648 通信用雷射二极管量测法
CNS 13649 通信用雷射二极管之可靠度测试
CNS 13650 通信用雷射二极管之批质量控制测试
CNS 14181 光纤通信用模拟视讯雷射传输和接收模块之性能量测法
CNS 14182 光纤通信用模拟视讯雷射传输和接收模块之可靠度及批质量控制测试
 

英国雷射标准(BS laser standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |

编号

中文名称

英文名称

BS 3900-J13-2001

涂料的试验方法.涂覆粉试验.用 雷射衍射法分析粒径

Methods of test for paints - Testing of coating powders - Particle size analysis by laser diffraction

BS 5381-2-1998

烟草和烟草制品物理特性测定方法.2部分:用激光束测量仪器测定卷烟和滤嘴标准直径

Methods for determination of physical properties of tobacco and tobacco products - Nominal diameter of cigarettes and filter rods using a laser beam measuring apparatus

BS 6955-1-1994

振动和冲击传感器的校准.采用雷射干涉测量法对主振动的校准方法

Calibration of vibration and shock pick-ups - Methods for primary vibration calibration by laser interferometry

BS 7334-6-1992

建筑施工用测量仪器.6部分:雷射仪器使用精度的测定方法

Measuring instruments for building construction - Methods for determining accuracy in use of laser instruments

BS DD IEC/PAS 61280-2-10-2003

纤维光学通信子系统试验程序.数字系统.雷射发射机的时间分辨线性调频脉冲和α因子测量

Fibre optic communication subsystem test procedures - Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters

BS EN 12254-1999

雷射工作场所用屏幕.安全要求和试验

Screens for laser working places - Safety requirements and testing

BS EN 12584-1999

氧气火焰切割、激光束切割和等离子体切割缺陷.术语

Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology

BS EN 15042-1-2006

覆层厚度测量和表面波纹表征.采用雷射感应表面声波法对各膜层的弹性常数、密度和厚度的测定指南

Thickness measurement of coatings and characterization of surfaces with surface waves - Guide to the determination of elastic constants, density and thickness of films by laser induced surface acoustic waves

BS EN 207-1999

眼睛保护.抗雷射辐射用滤光镜和护目器(雷射护目镜)

Personal eye-protection - Filters and eye-protectors against laser radiation (laser eye-protectors)

BS EN 208-1999

眼睛防护.雷射和雷射系统调节工作用护目镜(雷射调节护目镜)

Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)

BS EN 2266-005-2005

航空航天系列.通用电缆.操作温度为-55 °C 200 °C .紫外雷射可印刷.产品标准

Cables, electrical, for general purpose Operating temperatures between??-55 and 200 ℃ — Part 005: UV laser printable Product standard

BS EN 2266-007-2005

航空航天系列.通用电缆.操作温度为-55 °C 200 °C .紫外雷射可印刷多芯装套电缆.产品标准

Cables, electrical, for general purpose Operating temperatures between 55 and 200 ℃ — Part 007: UV laser printable multicore jacketed cable Product standard

BS EN 2267-007-2005

航空系列.一般用途的电缆,电器.-55°C260°C之间的操作温度.DMA族、单个可打印紫外 雷射和多芯附件.产品标

Cables, electrical, for general purpose Operating temperatures between -55 °C and 260 °C Part 007: DMA family, single ink-jet printable and multicore assembly Product standard

BS EN 2267-008-2005

航空系列.一般用途的电缆,电器.-55°C260°C之间的操作温度.DM族、单个可打印紫外 雷射和多芯附件.产品标

Cables, electrical, for general purpose Operating temperatures between -55 °C and 260 °C Part 008: DM family, single UV laser printable and multicore assembly Product standard

BS EN 2267-009-2005

航空系列.一般用途的电缆,电器.-55℃和260℃之间的操作温度.DRA族、单个可打印UV雷射和多芯附件.产品标准

Cables, electrical, for general purpose Operating temperatures between -55 and 260 ℃ — Part 009: DRA family, single and multicore assembly Product standard

BS EN 2267-010-2005

航空系列.一般用途的电缆,电器.-55℃和260℃之间的操作温度.DM族、单个可打印UV雷射.产品标准

Cables, electrical, for general purpose Operating temperatures between -55 and 260 ℃ — Part 010: DR family, single UV laser printable Product standard

BS EN 2713-007-2005

航空航天系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 200 °C之间.屏蔽式(螺旋式)和有护套的可印

Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Screened (spiral) and jacketed, UV laser printable - Product standard

BS EN 2714-007-2005

航空航天系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 260 °C之间.屏蔽式(螺旋式)和有护套的可印

Cables, electrical, single and multicore for general purpose Operating temperatures between -55 and 260 ℃ — Part 007: Screened (spiral) and jacketed, UV laser printable Product standard

BS EN 2714-011-2005

航空航天系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 260 °C之间.DM族、屏蔽式(螺旋式)和有护套

Cables, electrical, single and multicore for general purpose Operating temperatures between -55 and 260 ℃ — Part 011: DM family, screened (spiral) and jacketed, UV laser printable Product standard

BS EN 2714-012-2005

航空航天系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 260 °C之间.DM族、屏蔽式(麻花型)和有护套

Cables, electrical, single and multicore for general purpose Operating temperatures between -55 and 260 ℃ — Part 012: DM family, screened (braided) and jacketed, UV laser printable Product standard

BS EN 2714-013-2005

航空航天系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 260 °C之间.DM族、屏蔽式(螺旋式)和有护套

Cables, electrical, single and multicore for general purpose Operating temperatures between -55 and 260 ℃ — Part 013: DR family, screened (spiral) and jacketed, UV laser printable Product standard

BS EN 31253-1996

雷射和相关设备.雷射装置.机械接口

Lasers and laser-related equipment - Laser device - Mechanical interfaces

BS EN 3475-706-2005

航空航天系列.飞行器用电缆.试验方法.雷射可标记性

Cables, electrical, aircraft use Test methods Part 706: Laser markability

BS EN 60601-2-22-1996

医疗电气设备.安全专门要求.雷射诊断和治疗设备规范

Medical electrical equipment - Particular requirements for safety - Specification for diagnostic and therapeutic laser equipment

BS EN 60825-1-1994

雷射产品的辐射安全性.1部分:设备分类、要求和使用者指南

Safety of laser products - Equipment classification, requirements and user's guide

BS EN 60825-12-2004

雷射产品的安全.用于信息传输的自由空间光通信系统的安全

Safety of laser products - Safety of free space optical communication systems used for transmission of information

BS EN 60825-2-2004

雷射产品的安全.光纤通信系统的安全

Safety of laser products - Safety of optical fibre communication systems (OFCS)

BS EN 60825-4-1998

雷射产品安全.雷射防护装置

Safety of laser products - Laser guards

BS EN 60856-1993

50HZ/625行预录式光反射视讯光盘录像系统"雷射视讯光盘".PAL制规范

Specification for pre-recorded optical reflective videodisk system "Laser vision" 50 Hz/625 lines - PAL

BS EN 61040-1993

雷射辐射功率和能量探测器、仪表和设备规范

Specification for power and energy measuring detectors, instruments and equipment for laser radiation

BS EN 61096-1993

数字激光唱机用放音设备特性测量方法

Methods of measuring the characteristics of reproducing equipment for digital audio compact discs

BS EN 61280-1-4-2003

光纤通信子系统基本试验程序.一般通信子系统的试验程序.多模纤维 雷射发射机用二维近场数据的采集和整理

Fibre optic communication subsystem basic test procedures - Test procedures for general communication subsystems - Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters

BS EN 61751-1998

雷射电信模块.可靠性评定

Laser modules used for telecommunication - Reliability assessment

BS EN 62107-2002

高级雷射视讯光盘.光盘互换系统.规范

Super video compact disc - Disc-interchange system-specification

BS EN 62148-11-2004

纤维光学有源组件及器件.包装和接口标准.14针调制器集成 雷射二极管发射机

Fibre optic active components and devices - Package and interface standards - 14-pin modulator-integrated laser diode transmitters

BS EN 62148-12-2004

纤维光学有源组件和器件.包装和接口标准.带同轴RF连接器的 雷射发射机

Fibre optic active components and devices - Package and interface standards - Laser transmitters with coaxial RF connector

BS EN 62149-3-2004

纤维光学有源组件和器件.性能标准.2.5Gbit/s调制器-集成 雷射二极管发射机

Fibre optic active components and devices - Performance standards - 2,5 Gbit/s modulator-integrated laser diode transmitters

BS EN 821-2-1997

高技术陶瓷.整体陶瓷.热物理特性. 雷射闪烁法(或热脉冲法)对热扩散率的测定

Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Determination of thermal diffusivity by the laser flash (or heat pulse) method

BS EN ISO 11146-1-2005

雷射和雷射相关设备.激光束宽度、发散角和束扩散率的试验方法.无象散和简单象散束

Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Stigmatic and simple astigmatic beams

BS EN ISO 11146-2-2005

雷射和雷射相关设备.激光束宽度、发散角和束扩散率的试验方法.一般象散束

Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - General astigmatic beams

BS EN ISO 11149-1997

光学和光学仪器.雷射和雷射相关装置.非远程通讯 雷射用的光纤连接器

Optics and optical instruments - Lasers and laser related equipment - Fibre optic connectors for non-telecommunication laser applications

BS EN ISO 11151-1-2000

雷射和雷射相关设备.标准光学组件.紫外线、可见光和近红外光谱范围内的组件

Lasers and laser-related equipment - Standard optical components - Components for the UV, visible and near-infrared spectral ranges

BS EN ISO 11151-2-2000

雷射和雷射相关设备.标准光学组件.红外光谱范围内的组件

Lasers and laser-related equipment - Standard optical components - Components for the infrared spectral range

BS EN ISO 11252-2004

雷射和雷射相关设备.雷射装置.文献工作的最低要求

Lasers and laser-related equipment - Laser device - Minimum requirements for documentation

BS EN ISO 11254-1-2000

雷射和雷射相关设备.光表面雷射导致损伤阈的测定.1-on-1试验

Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - 1-on-1 test

BS EN ISO 11254-2-2001

雷射和雷射相关设备.光表面雷射导至损伤阈值的测定.S-on-1试验

Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - S-on-1 test

BS EN ISO 11551-2004

光学和光学仪器.雷射和雷射设备

Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components

BS EN ISO 11553-1-2005

机械安全.雷射加工机械.一般安全要求

Safety of machinery - Laser processing machines - General safety requirements

BS EN ISO 11670-2003

激光器和雷射相关设备.激光束参数的试验方法.束定位稳定性

Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability

BS EN ISO 11810-1-2005

雷射和雷射相关设备.手术布单和/或病人保护覆盖物耐 雷射性的试验方法和分类.基本点燃和穿透性

Lasers and laser-related equipment - Test method and classification for laser resistance of surgical drapes and/or patient protective covers - Primary ignition and penetration

BS EN ISO 11990-2003

光学和光学仪器.激光器和相关的雷射设备.气管柄抗 雷射性的测定

Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts

BS EN ISO 12005-2003

激光器和雷射相关设备.激光束参数的试验方法.偏振

Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization

BS EN ISO 13694-2001

光学和光学仪器.雷射和雷射设备.激光束能量密度分布的试验方法

Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution

BS EN ISO 13695-2004

光学和光子学.雷射和相关设备.雷射的光谱特性的试验方法

Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers

BS EN ISO 13919-1-1997

焊接.电子和激光束焊接接头.缺陷的品质级别导则.

Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Steel

BS EN ISO 13919-2-2001

焊接.电子和激光束焊接接头.缺陷的质量分级指南.铝及其可焊合金

Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Aluminium and its weldable alloys

BS EN ISO 15367-1-2003

雷射和雷射相关设备.测定激光束波阵面形状的试验方法.术语及基础领域

Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Terminology and fundamental aspects

BS EN ISO 15609-4-2004

金属材料焊接程序的规范和合格鉴定.焊接程序规范.激光束焊接

Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Laser beam welding

BS EN ISO 15614-11-2002

金属材料焊接程序的规范和合格鉴定.焊接程序试验.电子和激光束焊接

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Electron and laser beam welding

BS EN ISO 15616-1-2003

高质量焊接和切割用CO2激光束机的验收试验.通用原则和验收条件

Acceptance tests for CO2- laser beam machines for high quality welding and cutting - General principles, acceptance conditions

BS EN ISO 15616-2-2003

高质量焊接和切割用CO2激光束机的验收试验.静态和动态精确度的测定

Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Measurement of static and dynamic accuracy

BS EN ISO 15616-3-2003

高质量焊接和切割用CO2激光束机的验收试验.气体流量和压力测量仪的校正

Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Calibration of instruments for measurement of gas flow and pressure

BS EN ISO 17526-2003

光学和光学仪器.激光器和雷射相关设备.激光器的使用寿命

Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers

BS EN ISO 22827-1-2006

Nd:YAG激光束焊接机器的验收试验.带光纤送的机器.雷射装配

Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Laser assembly

BS EN ISO 22827-2-2006

Nd:YAG激光束焊接机器的验收试验.带光纤传送的机器.移动机理

Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Moving mechanism

BS IEC 60825-8-2000

雷射产品的安全.医疗雷射设备安全使用指南

Safety of laser products - Guidelines for the safe use of medical laser equipment

BS ISO 10110-13-1998

光学和光学仪器.光学组件和系统图纸的制备.13部分:雷射辐射损坏阈值

Optics and optical instruments - Preparation of drawings for optical elements and systems - Laser irradiation damage threshold

BS ISO 10110-17-2004

光学和光学仪器.光学组件和系统制图准备.雷射辐射损害阈

Optics and optical instruments - Preparation of drawings for optical elements and systems - Laser irradiation damage threshold

BS ISO 13320-1-2000

细微性分析.雷射衍射方法.一般规则

Particle size analysis - Laser diffraction methods - General principles

BS ISO 14408-1998

雷射外科用气管管子的设计.标记和附加信息要求

Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information

BS ISO 16063-11-2001

振动和冲击传感器的校准方法.采用雷射干涉量度法的主要振动校准

Methods for the calibration of vibration and shock transducers - Primary vibration calibration by laser interferometry

BS ISO 16063-13-2002

振动和冲击传感器的校准方法.采用雷射干涉测量法的主要冲击校准

Methods for the calibration of vibration and shock transducers - Primary shock calibration using laser interferometry

BS ISO 22826-2006

金属材料焊缝的破坏性试验.雷射和电子束焊测定窄接头硬度的试验(维氏和努氏硬度试验)

Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)

BS ISO TR 11552-1998

雷射和与雷射相关的设备.雷射材料-加工机械.金属切削的性能规范和基准点

Lasers and laser-related equipment - Laser materials-processing machines - Performance specifications and benchmarks for cutting of metals

BS ISO TR 11991-1997

上导气管雷射外科手术时导气管的管理指南

Guidance on airway management during laser surgery of upper airway

BS QC 720102-1997

光纤系统和子系统用带引线的雷射二极管模数的空白详细规范

Blank detail specification for laser diode modules with pigtail for fibre optic systems and subsystems

编号

中文名称

英文名称

其它相关试验文章:

 
  LD雷射二极管规范 LD雷射二极管规范
  LED专有名词 LED专有名词
  LED规范列表 LED规范列表
  LED交通号志试验 LED交通号志试验
  LED路灯试验规范 LED路灯试验规范
  发光二极管试验 通讯用发光二极管试验
  道路用文字LED试验 道路用文字LED试验